Double-Sided Fixed-Gear Threading

Double-Sided Fixed-Gear Threading and a 16T Cog on the ARC GT-010FA/RA Track Hub Set

17 min read
On this page 5 sections

The ARC GT-010FA/RA track hub set answers a specific fixed-gear problem: riders and builders want one rear hub that can support different sprocket positions without committing the frame or chainline to a single setup. ARC (Taicang Xiangyue Sports Equipment Co., Ltd.) equips this hub set with double-sided fixed-gear threading and supplies it with a 16T fixed-gear sprocket and lockring, so the threading and the cog can be assessed as one configuration rather than as separate catalogue items.

What Double-Sided Fixed-Gear Threading Changes

Fixed-gear drivetrains depend on the rear cog staying exactly where it was set. That makes the threading layout a functional decision, not a cosmetic one. On a single-sided threaded hub, the cog position is effectively fixed by which side the threads sit on; changing chainline or flipping the wheel means changing the hardware or the frame spacing.

Double-sided fixed-gear threading gives the hub shell a threaded section on both sides of the rear hub. In practice, this means a builder can place the sprocket on either side when assembling the wheel, then use the opposite side as the reference for chainline measurement or as an alternative mounting position. For track and fixed-gear frames where rear spacing, dropout type and chainstay clearance vary from brand to brand, that flexibility reduces the chance of a hub being rejected late in the build.

It is worth being precise about what this does and does not do. Double-sided threading expands sprocket positioning options; it does not change the hub's overall width, axle standard or frame interface. Buyers should still confirm rear spacing and chainline against their frame drawing rather than assuming the second threaded side automatically solves a spacing mismatch. What the layout genuinely improves is the builder's freedom to match cog placement to the intended chainline without sourcing a different hub shell.

Because the GT-010FA/RA carries threading on both sides, it also behaves predictably during wheel building: the hub can be laced and trued without the cog installed, and the drivetrain side can be decided once the rim and frame are known. That sequencing matters to custom wheelset builders who assemble to order and cannot afford to rebuild a wheel because the cog ended up on the wrong side.

The Supplied 16T Cog and Lockring in Practice

The 16T fixed-gear sprocket is supplied with the hub set along with a lockring, and that pairing is the part that makes the threaded layout usable straight from the box. The cog provides the tooth count the drivetrain is built around; the lockring is what secures it against the threaded section so the cog does not unwind under the reversing loads that fixed-gear riding imposes.

For the buyer, the practical value is in how the cog and the two threaded sides relate. The 16T cog can be mounted on the side that yields the required chainline, with the lockring securing it on that same threaded section. The opposite threaded side remains available as the alternative position. This is a configuration question, not a performance claim: the correct side is the one that puts the chain run straight between the chainring and the cog for the specific frame and crank setup being built.

Gearing is the other consideration. A 16T cog is a common starting point for track and street fixed-gear builds, but the right ratio depends on the chainring, the rider's cadence target and the terrain or track being ridden. Buyers should treat 16T as the supplied baseline and confirm the final ratio with their own chainring choice, rather than reading the tooth count as a fixed gearing recommendation.

ARC supplies the GT-010FA/RA as a set with the cog and lockring included, which simplifies procurement for brands and wheel builders who would otherwise need to source these separately and verify thread compatibility. For OEM and ODM programs, this bundled configuration is a sensible starting specification that can be discussed against a brand's own drivetrain requirements.

20H Front and 24H Rear: Wheel-Building Implications

The drilling counts shape the rest of the build as much as the threading does. A 20-hole front and 24-hole rear pair is a lighter, race-oriented lacing pattern rather than a high-spoke-count touring layout, and that constrains rim and spoke selection before the hub is ever laced.

In practice, a 24H rear means the builder chooses a 24-hole rim and a spoke count and lacing pattern that suit it — commonly a two-cross or three-cross pattern depending on rim depth and flange geometry. The 20H front similarly requires a 20-hole rim. Builders planning to reuse existing rims should check hole counts first, because a 24H rear hub cannot be laced to a 28H or 32H rim without changing the rim.

The lighter spoke count also affects how the wheel is tensioned and how much margin the builder has. Fewer spokes means each spoke carries a larger share of the load, so rim stiffness, spoke gauge and build quality matter more than they would on a 32H wheel. For track use on smooth surfaces this is a normal trade-off; for rough street riding or heavier riders, buyers should consider whether the 20H/24H configuration matches the intended service rather than assuming it fits every fixed-gear application.

Pairing the drilling with the double-sided threading gives builders a coherent package: a rear hub that can be positioned for chainline and laced to a 24H rim, and a front hub that matches a 20H rim for a balanced, race-style wheelset. ARC's hub manufacturing background in CNC machining and wheel-component production is the relevant capability here, since consistent flange geometry and drilling accuracy directly affect how cleanly the wheel builds and trues.

Fit Checks Before Sampling the GT-010FA/RA

Before requesting samples, buyers should verify a short list against their own frame and wheel drawings. Most costly mismatches on a hub like this are discovered at the drawing stage, not after the sample arrives.

  • Rear spacing and dropout type. Confirm the frame's rear spacing and dropout style match the hub's axle configuration; double-sided threading does not alter the hub's overall width.
  • Chainline. Work out the intended chainline from the crank and chainring, then confirm which threaded side and cog position achieves it on the actual frame.
  • Gearing. Confirm the 16T cog suits the planned chainring and target ratio, and decide whether a different cog will be fitted later — which makes the second threaded side more or less valuable to the build.
  • Rim and spoke availability. Check that 20H front and 24H rear rims are available in the intended depth and material, and that spoke lengths can be calculated from the actual flange dimensions.
  • Lockring and thread compatibility. Verify the supplied lockring and cog threading match the hub's threaded sections and the buyer's assembly tooling.
  • Frame clearance. Check chainstay and seatstay clearance for the chosen cog and chainring combination, especially on tight track frames.

Items not stated in the product description — such as bearing specification details beyond the stated S&S steel bearing options, order quantities, lead times and any certification requirements — should be confirmed directly with ARC during the sampling conversation rather than assumed.

ARC's OEM and ODM hub programs for bicycle brands, wheel manufacturers and distributors are the natural route for buyers who need the GT-010FA/RA adapted to a specific frame standard or branding requirement. Because the company manufactures hubs in-house with CNC machining and quality control, configuration questions about threading, drilling and supplied components can be addressed at the specification stage rather than after tooling.

For track and fixed-gear brands and custom wheelset builders weighing this hub set, the GT-010FA/RA is worth putting on the sampling shortlist when the build calls for double-sided threading, a supplied 16T cog and lockring, and a 20H/24H drilling pattern. The most useful next step is to send ARC the frame spacing, target chainline and rim specification so the configuration can be checked against the actual build before samples are ordered.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China