ARC MT-028F/R Road Hub

How to Choose the ARC MT-028F/R Road Hub Set for a Carbon-Spoke Wheel Build

12 min read
On this page 5 sections

For a carbon-spoke road wheel program, the hub is not a background component. It sets the spoke interface, the tension balance across the wheel, the brake and axle fit, and the drivetrain options a wheelset brand can offer. The ARC MT-028F/R Road Hub Set is built specifically around that job, which is why it makes sense to evaluate it as a build-level checklist rather than reading it as a standalone specification sheet.

Start With the Spoke Interface, Not the Hub Weight

The first pass/fail gate is whether the hub accepts the spokes the wheel design already calls for. Carbon spokes are not a single standard, and the attachment end is where mismatches appear. The MT-028F/R uses a dedicated T-head spoke configuration with T-head holes designed for Hongji Weiye Type B and Type C carbon spokes. If the rim and spoke choice fall outside those types, the build should stop here regardless of how well the rest of the specification reads.

This ordering matters because spoke interface determines tooling, assembly method, and how the wheel builder handles tensioning. A hub weight of approximately 355.6g is only meaningful after the spoke gate is cleared; choosing a hub first and then finding a compatible carbon spoke narrows options unnecessarily and can force compromises in the rim selection.

Check Spoke Count and Lacing Against Your Rim

The MT-028F/R is drilled 21H front and rear in a 2:1 layout. That is a deliberate structural choice: two spokes on one side of the flange for every one on the other, which is how many carbon-spoke designs pursue more even tension between the drive and non-drive sides. Before committing, compare the hub drilling to what the rim manufacturer specifies. A 21H hub cannot be laced to a rim drilled for a different count, and the rim's spoke bed needs to suit the 2:1 pattern rather than a conventional balanced layout.

Builders should also confirm that the intended spoke lengths work with the flange geometry and lacing pattern. Tension targets, stiffness goals and the rider load the wheelset is designed for all influence whether 21H 2:1 suits the program. For a disc-brake road wheelset where front and rear carry different loads, matching the drilling to the rim's own design intent is more reliable than treating spoke count as an afterthought.

Match Axle, Brake and Freehub to the Frame and Groupset

Frame fit and drivetrain fit can be settled quickly, and both should be confirmed before sampling. The MT-028F/R uses 12×100mm front and 12×142mm rear thru-axle spacing, which aligns with current disc-brake road frames. The Center Lock disc interface is the brake-side decision: the rotor mounting system must match what the wheelset brand intends to supply, since this affects the hub body, rotor hardware and assembly sequence.

On the drivetrain side, ARC offers this hub set with Shimano HG, Road Micro Spline, SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed freehub standards. A wheelset program sold across multiple groupset ecosystems can use that range to cover more of the market with one hub platform, but each freehub option should be listed explicitly in the build specification rather than assumed. Because ARC provides OEM and ODM solutions for wheel manufacturers and distributors, freehub and axle configuration is the kind of detail worth raising early in the customization discussion rather than at the purchase order stage.

Choose the Ratchet and Confirm the Build Details

Engagement is the remaining performance decision. The MT-028F/R is offered with a 36T or 54T ratchet, both using ARC's patented one-piece ratchet architecture. More teeth generally means quicker engagement and a different feel under pedaling, while fewer teeth can suit riders who prefer a more conventional pickup. The right choice depends on the wheelset's positioning and the riders it targets, not on a universal preference, so the engagement option should be fixed in the specification before samples are built.

The material set is also worth noting at this stage: an AL6061-T6 aluminum hub shell with AL7075 aluminum axle, freehub body and end caps. That combination supports the lightweight and durable construction the design targets, but it should be verified in the same sample review as everything else.

A practical pre-order sample check for the MT-028F/R would confirm:

  • T-head hole fit with the actual Hongji Weiye Type B or Type C carbon spokes specified
  • 21H 2:1 drilling against the rim's spoke count and lacing requirement
  • Freehub standard and 12×100mm / 12×142mm thru-axle spacing against the frame and groupset
  • Center Lock rotor mounting and the intended rotor hardware
  • 36T or 54T ratchet selection in the delivered sample
  • Spoke tension balance and build quality on a completed sample wheel

ARC's CNC machining, precision manufacturing and quality control systems are the manufacturing base behind this hub set, and they are relevant to how consistently these details hold across a production run. For wheel builders and wheelset brand product managers evaluating a carbon-spoke disc road program, the MT-028F/R is a hub set worth putting on the sample list, provided the spoke type, 21H 2:1 drilling and freehub and ratchet configuration all match the build. Confirm those points on a physical sample before committing to volume, and the specification sheet becomes a reliable basis for production decisions.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China