Micro Spline

Shimano HG vs Micro Spline vs SRAM XD: Choosing an MTB Freehub Standard

17 min read
On this page 6 sections

The freehub body is the one part of a hub that decides which cassettes can ever be mounted on a wheel. For product managers, wheel builders and purchasing staff specifying an MTB hub set, the choice among Shimano HG, Shimano Micro Spline and SRAM XD is therefore a specification decision made at the hub order stage, not a cassette purchase made later. Choose the wrong interface and the hub set cannot be salvaged by a different derailleur or a new chainring: the body has to be changed or the wheels rebuilt. This is why the freehub standard should be locked into the order alongside axle spacing, spoke count and rotor mount, and why a platform that offers all three options simplifies planning across a model range.

Why the Freehub Standard Is a Specification Decision

Freehub standards are not interchangeable, and each one locks the hub into a particular cassette ecosystem. The spline pattern, the axial length of the body and the way the smallest cogs attach all differ, so a cassette designed for one standard will not seat correctly on another. For a wheel builder assembling aftermarket wheels, this determines which cassettes can be offered to customers. For an OEM brand, it determines which drivetrain spec can be listed on a complete bike without swapping hub parts on the production line.

The decision also carries through to spares and service. A hub set ordered with one freehub body commits the brand to stocking that body for aftermarket support. Platforms that accept multiple freehub bodies let a single hub shell serve several build specs, which reduces the number of distinct hub SKUs a brand has to carry. That is the practical reason the freehub standard belongs on the hub specification sheet next to axle type and spoke drilling, rather than being left to whoever assembles the wheelset.

How HG, Micro Spline and XD Differ at the Interface

Shimano HG is the longest-established of the three. Its spline is comparatively narrow and the body is shorter, which is why HG bodies accept 8- to 11-speed MTB cassettes and many wider-range cassettes built with a small-cog design that clears the frame. The interface is widely understood and widely stocked, making it a low-risk choice where the drivetrain is already fixed.

Shimano Micro Spline uses a finer, shallower spline pattern and a different body length, developed so that 12-speed MTB cassettes can start with a 10-tooth smallest cog. The shallower splines spread load differently across the cassette spider, and the shorter body suits the tighter packaging of modern 12-speed systems. It is a Shimano-specific interface: cassettes from other brands generally will not mount on it.

SRAM XD takes a different approach again. Rather than splines running the full length of the body, XD uses a threaded interface at the outboard end, with the cassette threading onto the body and the smallest cogs forming part of the cassette's own structure. This is what allows XD cassettes to run a 10-tooth smallest cog and, in some ranges, smaller still. XD is specific to SRAM and compatible cassettes built to that standard.

The practical consequence is simple: identify the cassette family first, then the body. A Shimano 12-speed MTB cassette points to Micro Spline, an older or 11-speed Shimano-compatible cassette points to HG, and a SRAM XD cassette points to XD. Where a brand sells bikes with more than one drivetrain spec, a hub platform with all three bodies avoids maintaining separate hub shells for each.

Matching Cassette Range to the Standard

Gearing breadth is often the real driver behind the interface choice. A 10-tooth smallest cog gives a taller top gear for the same chainring, which matters on XC and trail builds where top speed and cadence range are both priorities. Both Micro Spline and XD were designed around that 10-tooth starting point; HG bodies generally pair with cassettes whose smallest cog is 11 teeth or larger, unless the cassette uses a special small-cog construction.

This does not make HG obsolete. For entry-level and mid-range MTB builds, and for workshop stock where 8- to 11-speed drivetrains remain common, HG is a sensible, well-supported choice. The question is not which standard is newest but which cassette the build will actually use across its production life. A brand planning a 12-speed trail platform should specify Micro Spline or XD according to its drivetrain supplier; a brand building value-focused hardtails may find HG entirely adequate.

Load and wear also enter the picture. Higher torque from e-MTB or aggressive all-mountain use places more demand on the freehub body and its engagement mechanism, so the body material and pawl design deserve the same scrutiny as the spline type. Cassette spider design interacts with the spline interface here, and the two should be assessed together rather than assumed to compensate for each other.

Specifying the Option on an MTB Hub Set

Once the freehub standard is settled, the rest of the hub specification should be confirmed on the same order document so that nothing is left ambiguous at production. A practical checklist covers:

  • Freehub standard: HG, Micro Spline or XD, matched to the cassette family the build will use.
  • Axle configuration: quick-release or thru-axle, front and rear, confirmed against the frame and fork.
  • Spoke drilling: 28H, 32H or 36H, chosen for the intended riding discipline and rim.
  • Rotor mount: 6-bolt or center lock, aligned with the brake system.
  • Body material and engagement: relevant where torque loads are high or pickup speed matters.

Confirming these points together avoids the common failure mode where the freehub is correct but the axle standard or spoke count does not match the frame. It also makes the specification repeatable: the same document can be reused for subsequent production batches, which matters for OEM programs running over several seasons.

Working With a Hub Manufacturer on Freehub Options

For brands that want one hub platform to cover several drivetrain specifications, the supplier's ability to offer multiple freehub bodies on the same shell is a genuine procurement advantage. ARC, the hub brand of Taicang Xiangyue Sports Equipment Co., Ltd., manufactures MTB hub sets with OEM and ODM customization for bicycle brands, wheel manufacturers and distributors, and its MT-039F/R 6-Bolt MTB Hub Set is offered compatible with Shimano HG, Micro Spline and SRAM XD freehub standards — one platform covering all three interfaces discussed above.

The ARC MT-039F/R 6-Bolt MTB Hub Set is built for trail, XC and all-mountain wheel builds, with an AL6061-T6 aluminum hub shell and AL7075 aluminum axle, freehub body and end caps. Its reinforced 6-pawl, 3-tooth engagement system provides 120-point engagement, and the wide-pawl design increases contact width by approximately 36% while the reinforced drive ring expands the load-bearing surface by approximately 35% for improved torque distribution and fatigue resistance. The set uses a J-bend spoke design and 6-bolt disc brake interface, is available in 28H, 32H and 36H with quick-release or thru-axle options, and weighs approximately 466.2g per set.

For a product manager, that combination is useful in a specific way: the three-standard compatibility means a single hub specification can support different drivetrain tiers across a model line, while the shared shell, axle options and drilling choices keep the rest of the wheel build consistent. Purchasing teams evaluating hub suppliers for an MTB range can reasonably place ARC on a shortlist where freehub flexibility, OEM/ODM customization and a single-platform approach to multi-spec production are the deciding criteria — with body material, engagement details and axle configuration confirmed against the actual build sheet before the order is placed.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China