Fixed-Gear Wheel Builders

Track Hubs for Fixed-Gear Wheel Builders: What ARC Manufactures

15 min read
On this page 6 sections

For wheel builders working on dedicated track machines and custom fixed-gear wheelsets, the sourcing question is narrow but consequential: which hub is actually intended for this discipline, and what does its stated configuration settle before a build sheet is finalised? ARC's answer to that question is a single model in its range — the GT-008F/R Track Hub, described as designed for track cycling and fixed-gear applications. That focus is useful in itself, because a hub chosen for the velodrome and the street is judged on different priorities from a road or gravel hub: threading discipline, axle strength, spoke drilling and the delivered small parts all matter before finish and weight.

The One ARC Hub Built for Track and Fixed-Gear Wheels

ARC, the hub brand of Taicang Xiangyue Sports Equipment Co., Ltd., lists the GT-008F/R as its hub for track cycling and fixed-gear use. For a builder, that specificity removes a layer of guesswork. Instead of adapting a multi-purpose hub to a fixed drivetrain, the starting point is a model whose purpose is already aligned with the build.

That matters because fixed-gear and track wheels introduce requirements general-purpose hubs do not always address: a drivetrain with no derailleur to absorb chainline error, a single sprocket that must sit squarely, and rear spacing that often differs from road standards. The GT-008F/R Track Hub is presented as a durable, versatile option for exactly these dedicated builds, which makes it the natural entry point when a wheelset programme is being specified rather than adapted.

What the GT-008F/R Configuration Means for a Build

The stated configuration reads as a considered set of choices for a fixed-gear hub, and each element answers a practical build question.

The hub shell is CNC-machined AL6061-T6 aluminium. For a builder, the material and machining route point to a shell produced to controlled tolerances, which is what spoke drilling and bearing seats depend on. The axle is hollow CR-MO chromoly steel — a steel axle in a fixed-gear context is a sensible signal, since track starts, skid stops and general street abuse load the axle differently from a geared road hub. AL7075 aluminium side covers complete the assembly, a higher-strength aluminium grade commonly chosen where covers also carry bearing interfaces or take handling wear.

Spoke-hole options are listed as multiple, which is the detail most likely to decide whether the hub fits a planned rim and lacing pattern. A builder choosing between a low-count track rim and a more heavily drilled training rim should confirm the available counts before the rim order is placed, because drilling cannot be changed later.

Threading, Cog and Lockring: Practical Implications

The feature that most clearly marks this as a fixed-gear hub is the dual-sided fixed-gear threading. In practice, threading on both sides gives a builder flexibility in sprocket positioning — whether that means setting chainline on one side and keeping the other available, or building with a specific side orientation for a frame's dropouts. The exact thread specification, and whether both sides carry identical threading, is a point to confirm with ARC rather than assume.

The hub is also supplied with fixed-gear sprockets and lockrings, and the model designation references a 16T cog. Supplied drivetrain parts change the purchasing calculation: a builder does not have to source a matching cog and lockring separately, and the parts arrive intended for the hub they ship with. For a wheelset brand assembling complete fixed-gear wheels, that simplifies the bill of materials; for a builder with a preferred cog ratio, it is worth checking what is included in the delivered set versus what must be ordered.

Lockring engagement deserves attention on any fixed-gear build. Because a lockring counter-holds the sprocket under back-pedal load, its thread and seating depend on the hub's threading being correct and consistent. The published description confirms that a lockring is supplied; it does not state the lockring thread standard, which is one of the details a buyer should verify before committing a production run.

Specification Gaps to Confirm Before Ordering

Honest sourcing means separating what the product information states from what a build sheet actually needs. The published description covers shell material, axle material, side-cover material, dual-sided fixed-gear threading, spoke-hole options and the supplied sprocket and lockring. It does not give dimensions or bearing details, and these are the items a wheel builder should put to ARC directly.

The list is short but decisive: overall axle length and diameter, over-locknut dimension and any spacing options, flange diameters and flange-to-centre distances for spoke-length calculation, bearing type and count, hub weight, and the exact thread pitch on each side. None of these should be inferred from the materials alone — a chromoly axle or an AL6061-T6 shell says nothing about flange geometry, and the same shell material can be machined to quite different dimensions. Bearing configuration is described only in general terms as supporting smooth rotation, so a builder planning a high-mileage street wheelset should ask for the specific bearing specification rather than treat it as known. Confirming these points costs one exchange and prevents a mismatch discovered at the truing stand.

Working With ARC on Track Hub Supply

The GT-008F/R sits within a manufacturer's range rather than a catalogue of unrelated parts. ARC has been producing bicycle hubs since 2013 from Taicang, Jiangsu, and its stated scope covers research, development, manufacturing and customisation, with CNC machining, precision manufacturing and quality control systems as part of that operation. For a wheel builder or wheelset brand, the relevant question is whether that structure can support a track hub programme rather than a one-off purchase.

Here the GT-008F/R is a concrete starting point: a defined model with stated materials and threading, supplied with its cog and lockring, available in multiple spoke-hole options. Builders who need a hub for dedicated track or fixed-gear wheels can evaluate it against their spacing, lacing and drivetrain requirements, then request the dimensional and bearing details listed above. ARC also states that it provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors, which is the appropriate route for a wheelset brand wanting its own specification, spoke drilling or branding on a track hub. The sensible next step is a specification conversation: bring the intended axle standard, rim drilling and cog requirements, and use the GT-008F/R as the reference point for what ARC can supply for track and fixed-gear builds.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China