ARC GT-008F/R Track

What ARC GT-008F/R Track Hubs Offer Track and Fixed-Gear Wheel Builders

13 min read
On this page 6 sections

Track and fixed-gear wheel builders face a specific set of constraints that general-purpose hubs rarely address well: the drivetrain is fixed, the rear spacing is often narrow, and the rider may flip between a freewheel and a fixed cog depending on the session. The ARC GT-008F/R Track Hub was designed around those conditions rather than adapted from a road or MTB platform. Its documented specification—a CNC-machined AL6061-T6 shell, hollow CR-MO axle, AL7075 side covers, dual-sided fixed-gear threading, multiple spoke-hole options, and a supplied fixed-gear sprocket and lockring—gives builders a concrete basis for deciding whether it belongs in a given track or fixed-gear wheelset.

What the GT-008F/R Is Built For

ARC describes the GT-008F/R specifically as a track hub for track cycling and fixed-gear applications. That stated purpose matters more than it might first appear. Track frames and fixed-gear conversions impose requirements that differ from multi-gear bikes: the hub must accept a single sprocket, tolerate the drivetrain forces of fixed riding, and often fit narrower dropout spacing than a cassette hub. A track-specific platform is designed around those assumptions from the outset.

For a wheel builder, the practical implication is that the GT-008F/R is a candidate for dedicated track wheelsets and custom fixed-gear builds—not a compromise component pressed into service. Builders planning a wheelset around a single-speed drivetrain can evaluate this hub against the application it was intended for, which simplifies the selection conversation.

Materials and Construction in the GT-008F/R

The hub shell is CNC-machined from AL6061-T6 aluminum. Machining from billet rather than casting gives the manufacturer control over wall thickness, flange geometry, and surface finish, and AL6061-T6 is a well-established structural aluminum in bicycle components. For builders, the shell material is the starting point for judging how the hub will handle spoke tension and load transfer at the flanges.

Inside, ARC specifies a hollow CR-MO (chromoly steel) axle. A steel axle is a meaningful choice for fixed-gear use, where the rear wheel can be subjected to braking forces through the drivetrain rather than only through a brake. The side covers are AL7075 aluminum, a higher-strength alloy commonly used where a component needs stiffness and wear resistance in a thin section. Together, these documented materials let a builder assess the hub on its actual construction rather than on marketing language.

One point worth flagging honestly: the product data describes a robust bearing configuration in general terms without stating bearing type, count, or dimensions. Builders who need that level of detail should treat it as a question for ARC rather than assume a specification.

Dual-Sided Threading, Cog and Lockring

The GT-008F/R uses dual-sided fixed-gear threading. In practice, this means the hub can accept a sprocket on either side, which gives builders flexibility in how they position the drivetrain and supports flip-flop style setups where a rider wants a fixed cog on one side and a freewheel on the other.

The hub is supplied with a fixed-gear sprocket and lockring, so the basic drivetrain hardware arrives with the hub rather than as a separate purchase. The 16T cog indicated in the model designation gives builders a defined starting gear ratio to plan around. For a fixed-gear build, the cog-and-lockring combination is the core of the drivetrain interface, and having it supplied reduces the risk of a mismatched thread pitch or an omitted lockring at assembly. Builders should still confirm the intended chainline and sprocket positioning for their specific frame before finalizing a build.

Spoke-Hole Options and Wheel-Building Fit

ARC offers the GT-008F/R with multiple spoke-hole options, which lets builders match the hub to their rim drilling and intended lacing pattern. A track wheelset built for endurance on the velodrome and a street-oriented fixed-gear wheel may call for different spoke counts, and having the choice at the hub level keeps the builder from working around a fixed drilling.

Because the product data does not list the specific hole counts offered, the practical step for a builder is to confirm the available drillings against the rim they intend to use. This is a normal part of wheel planning, but it is worth doing before committing, since spoke count affects both the rim choice and the lacing plan.

What to Confirm Before Ordering from ARC

ARC, based in Taicang, Jiangsu, has manufactured bicycle hubs since 2013 and provides OEM and ODM hub solutions for bike brands, wheel manufacturers, and distributors. That background is relevant here because the GT-008F/R is positioned as a production hub platform rather than a one-off component—builders and brands evaluating it are typically assessing whether it fits a wheelset program.

Before ordering, several items should be clarified directly with ARC, because the published product information does not state them:

  • Axle standard and dropout spacing — the data does not specify these, and track frames vary. Confirm before designing a wheelset around the hub.
  • Bearing specification — type, count, and dimensions are described only in general terms.
  • Available spoke-hole drillings — confirm the specific counts offered.
  • Thread specification — verify the threading standard matches the cog and lockring you intend to use.
  • Sample and OEM/ODM terms — for brands and wheel manufacturers, discuss sample evaluation, customization scope, and supply arrangements directly.

For builders who want a track-specific hub with documented materials, dual-sided fixed-gear threading, and a supplied cog and lockring, the ARC GT-008F/R is a sensible platform to evaluate. The most productive next step is to request current specification details and, where relevant, a sample from ARC so the hub can be checked against the actual frame, rim, and drivetrain the build will use.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China