When buyers place a bulk order for track hubs, the spoke-hole specification is one of the few details that cannot be corrected after production. A hub drilled for the wrong spoke count or lacing pattern will not match the rim, will complicate wheel building, and can turn an otherwise sound purchase into scrap or rework. That is why the ARC GT-008F/R track hub is offered with multiple spoke-hole options: the configuration is meant to be fixed at the ordering stage, against a confirmed wheel-build plan. This article sets out what those options involve and what buyers should verify before committing a purchase order for the GT-008F/R.
Spoke-Hole Count Options
The spoke-hole count is the first specification to lock down, because it has to agree with the rim the wheel builder intends to use. Track and fixed-gear wheels are commonly built in traditional counts, and a rim drilled for one count cannot be laced to a hub drilled for another without compromising the build. The ARC GT-008F/R is available with multiple spoke-hole options, which gives wheel brands and distributors room to align the hub with the rim inventory they already carry rather than forcing a single configuration across every build.
For buyers, the practical question is not simply "how many holes," but which counts the order requires across the full range. A distributor supplying several wheel builders may need more than one count in the same shipment; a wheel brand producing a single flagship track wheelset may need only one. Because the spoke-hole option is a fixed choice at manufacture, the purchase order should state the count per line item, not as a general note. It also helps to record the intended rim and lacing pattern alongside the count, so that any query at production or QC stage can be resolved against the original build intent.
Drilling Configuration and Compatibility
Spoke-hole count and drilling configuration are related but distinct. The count determines how many spokes the hub accepts; the drilling determines the angle and orientation of each hole, which in turn affects how the spoke exits the flange and meets the rim. On a track hub, where the wheel is often built with high and uniform tension for stiffness and direct power transfer, the drilling has to suit the intended lacing pattern rather than being treated as a generic feature.
Buyers should therefore confirm two things together: the spoke-hole count, and the drilling orientation the wheel builder expects. A hub drilled for one lacing approach may not suit a builder planning a different pattern, even at the same hole count. This is best resolved by matching the hub specification to the rim's drilling and the intended build sheet before the order is placed, rather than after delivery.
Compatibility also extends to the rest of the hub. The GT-008F/R uses a CNC-machined AL6061-T6 aluminum hub shell, a hollow CR-MO chromoly steel axle and AL7075 aluminum side covers, and it is supplied with fixed-gear sprockets and lockrings. Those elements define the fixed-gear drivetrain side of the build; the spoke-hole selection defines the wheel-building side. Both need to be specified in the same order so the hub arrives ready for the build it was intended for. Buyers who want to review the full specification can consult the GT-008F/R Track Hubs product page before finalizing quantities.
Ordering Checklist for Buyers
Before signing off a purchase order for GT-008F/R hubs, buyers should work through a short list of confirmations. Each item is a specification that is difficult or impossible to change once production has begun.
- Spoke-hole count per line item. State the count explicitly for each hub variant ordered, rather than relying on a default.
- Drilling configuration. Confirm the drilling orientation matches the wheel builder's intended lacing pattern.
- Rim and build sheet reference. Record the target rim and build plan alongside the hub specification so the two can be checked against each other.
- Drivetrain side confirmation. Verify that the fixed-gear sprocket and lockring supply, and the double-sided fixed-gear threading, align with the drivetrain plan for the finished wheel.
- Quantity split by configuration. If more than one spoke-hole option is needed, allocate quantities clearly per option so production and packing match the order.
- Written confirmation before production. Ask for the spoke-hole specification to be confirmed in writing against the purchase order, so there is a single reference point for both parties.
This checklist is deliberately narrow. It covers the choices that belong to the spoke-hole and wheel-build side of the GT-008F/R order; broader questions about pricing, volume or delivery scheduling are separate commercial discussions and should be handled through the normal quotation process rather than assumed here.
For buyers sourcing track hubs for fixed-gear and track wheel assemblies, the spoke-hole decision is worth treating as a formal part of the purchase order rather than a detail left to the supplier. ARC manufactures the GT-008F/R with multiple spoke-hole options and supplies it with fixed-gear sprockets and lockrings, which makes it a practical candidate for buyers who need to align hub configuration with specific rim and build requirements. The most reliable route is to specify the count, drilling and drivetrain expectations in writing at the ordering stage, and to treat the confirmed specification as the reference for production and inspection. Buyers with a defined wheel-build plan will find the GT-008F/R worth including in their supplier evaluation for fixed-gear and track programs.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China