Road disc wheelsets are usually defined long before the first spoke is tensioned: the hub set determines the spoke interface, rotor mounting, axle fit, drivetrain compatibility and, ultimately, how freely the wheelset can be specified across a model range. The ARC MT-075FA/RA Road Hub Set is a useful reference point for that decision because it is published as a road disc hub set with a straight-pull spoke design and a 6-bolt disc brake interface, rather than a general-purpose hub adapted to road use. For wheelset brands, complete-bike OEMs and component distributors, the practical question is where each published feature affects the build and what still needs confirmation before sampling.
Where this hub set fits in a road disc build
The MT-075FA/RA is positioned for modern road disc wheel builds. That positioning matters because road disc hubs sit at the intersection of three requirements: a spoke layout that builders can lace efficiently, a rotor standard that matches the brake systems already specified on the bike, and axle spacing that matches current road frames and forks.
The hub set specifies 12×100mm front and 12×142mm rear thru-axle spacing, which aligns with the thru-axle format commonly used on contemporary road disc frames. It also carries a 24H front and rear hole count, giving builders a symmetric drilling pattern to work from when planning rim and spoke selection. These are not incidental details; they set the boundaries within which the rest of the wheelset is designed.
As a manufacturer, ARC has focused on bicycle hubs since its founding in 2013 in Taicang, Jiangsu, and supplies OEM and ODM hub solutions to bicycle brands, wheel manufacturers and distributors. That background is relevant here because a hub set like the MT-075FA/RA is typically bought as a specification item for a wheelset program, not as a standalone retail component.
Spoke interface, rotor mount and hole count
The straight-pull spoke design is the first build-defining choice. Straight-pull hubs avoid the J-bend at the hub flange, which changes how spokes are stocked and how lacing is planned. For builders, this usually means confirming spoke availability in the required lengths and head type before committing to a production run, since straight-pull spokes are not interchangeable with J-bend stock.
The 6-bolt rotor interface is the second interface decision. Six-bolt mounting remains widely used on road disc systems, and specifying it means the wheelset's brake compatibility is fixed at the hub rather than left to an adapter. Buyers should match this against the brake calipers and rotors already chosen for the bike platform.
The 24H front and rear configuration is the third. A 24-hole drilling pattern on both ends gives a consistent, balanced build approach across the wheelset and simplifies spoke count planning for the front and rear. Whether 24H suits a given rim and rider load case is a rim-and-spoke decision, not a hub claim, so it should be validated at the wheelset level.
Materials, engagement and axle spacing
The published material combination is an AL6061-T6 aluminum hub shell paired with high-strength AL7075 aluminum for the axle, freehub body and end caps. In practice, this separates the shell—where shape and flange geometry matter—from the load-bearing and wear-prone parts, which are specified in a higher-strength aluminum grade. Buyers evaluating durability should treat this as a stated material specification to verify against samples, not as a performance guarantee on its own.
Engagement is described as a 6-pawl, single-tooth system intended to deliver responsive pickup and consistent power transfer. In riding terms, pawl count and engagement geometry influence how quickly the drive engages when the rider resumes pedaling, but the actual feel also depends on the freehub body, spring specification and bearing condition. The MT-075FA/RA's contribution is the stated 6-pawl architecture; the wheelset builder should confirm engagement feel during sample testing rather than infer it from the count alone.
Axle spacing—12×100mm front and 12×142mm rear—is the fit fact that most directly constrains frame compatibility. Builders should confirm that the intended frame and fork use this thru-axle standard, including axle thread pitch and length, since spacing alone does not fully define the interface.
Freehub options, bearings and stated weight
Drivetrain coverage is one of the more practical advantages of this hub set for a multi-model wheelset program. ARC lists compatibility with Shimano HG, Road Micro Spline (MSR), SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed freehub standards. For distributors and OEMs, that range means one hub platform can serve riders across several groupset families, reducing the number of distinct hub specifications a program must carry.
Bearing specification is listed as S&S steel bearing options, which gives buyers a defined starting point for the rotating interface and a clear item to confirm during sampling. The published total weight is approximately 357.5g for the hub set, a figure that should be read as the stated weight for the specified configuration; actual weight can vary with freehub choice and bearing option, so it is worth confirming for the exact build being ordered.
The product's full configuration is published on the ARC MT-075FA/RA 24H Straight-Pull 6-Bolt Road Disc Hub Set page, which is the appropriate reference when matching freehub and bearing selections to a specific wheelset.
What to confirm with ARC before specifying
The published specification answers most of the interface questions, but a few points are best settled directly with ARC before a wheelset program commits. First, confirm the exact freehub standard and bearing option for each SKU, since the weight figure and drivetrain compatibility are tied to the chosen configuration. Second, confirm axle details beyond spacing—thread pitch and length—against the target frame and fork. Third, confirm spoke length and head-type guidance for the straight-pull flanges, so spoke sourcing can begin early. Finally, request samples to validate engagement feel, bearing smoothness and build quality under the intended rim and spoke combination.
For buyers assembling a road disc wheelset range, the MT-075FA/RA is a reasonable candidate to place on the shortlist: its straight-pull layout, 6-bolt mount, 24H drilling, defined material specification and broad freehub coverage map cleanly onto the decisions a wheelset program has to make. ARC's OEM and ODM model means those specifications can be discussed as a configuration exercise rather than a fixed catalog order, which is the right starting point for a builder who needs the hub set to fit a planned wheelset rather than the other way around.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China