Center Lock Road Disc Hub

What the ARC MT-082F/R 24H Center Lock Road Disc Hub Set Offers

14 min read
On this page 5 sections

The ARC MT-082F/R 24H Center Lock Road Disc Hub Set is a purpose-built road disc hub set for lightweight, performance-oriented wheel builds. ARC (Taicang Xiangyue Sports Equipment Co., Ltd.) supplies it with a 24-hole front and rear steel-spoke configuration, a patented one-piece ratchet available in 36T or 54T, a forged AL6061-T6 shell with AL7075 axle, freehub body and end caps, Center Lock disc mounting, 12×100 mm front and 12×142 mm rear thru-axle spacing, a choice of five freehub standards, three bearing configurations, and a stated complete set weight of approximately 311.4 g. What follows walks through these features in the order a wheel builder or component buyer actually needs to evaluate them: intended use, engagement, structure and fitment, then drivetrain and bearing configuration.

What the MT-082F/R Is Built For

The MT-082F/R starts from a clear design brief: road disc wheelsets where low weight and dependable drive engagement both matter. That brief explains several of its decisions at once. A 24-hole front and rear count keeps material and spoke count modest for lightweight road lacing, while the steel-spoke specification sets the spoke type the hub is intended to work with. Center Lock mounting aligns the set with the disc rotor standard used across modern road groups, and the 12×100 mm front / 12×142 mm rear thru-axle format matches current road disc frame and fork spacing rather than older quick-release standards.

For a product manager or wheelset builder, this positioning matters more than any single number: it tells you the set is aimed at road disc builds rather than gravel, MTB or e-bike applications, and it signals that the weight figure quoted for the set is meant to be judged in that road context. ARC manufactures this hub set and, more broadly, provides OEM and ODM hub solutions for bicycle brands, wheel manufacturers and distributors, which is relevant if the MT-082F/R is being considered as a platform for a branded wheelset rather than a one-off build.

Ratchet Engagement: 36T and 54T Options

The drive system is the feature most likely to shape a buyer's decision, because it affects both how the hub feels under power and how it is specified across a wheelset range. The MT-082F/R uses a patented one-piece ratchet engagement design, and that single-piece construction is the basis for the claim that load is distributed across the full ratchet contact surface — a broader contact area than designs where load concentrates on fewer, smaller engagement points. The practical intent is consistent engagement and efficient torque transfer, which are the qualities a road rider notices when accelerating out of a corner or applying power in a low-cadence effort.

ARC offers the ratchet in two tooth counts, 36T and 54T. Rather than treating one as better, the two options let a buyer map engagement character to the intended use of the wheelset. A higher tooth count generally means a smaller engagement step and quicker pickup when the rider resumes pedaling, while a lower tooth count reduces the number of engagement positions. Because the ratchet is a shared one-piece design across both options, choosing between 36T and 54T is a tuning decision within one hub platform, not a switch between unrelated products — useful when a range needs a lightweight climbing wheelset and a more responsive all-round wheelset built around the same hub.

Materials, Axle Standard and Brake Interface

The structural specification separates the shell from the load-bearing components. The hub shell is forged AL6061-T6 aluminum, a material and forming route chosen for a balance of strength and weight in the shell itself. The axle, freehub body and end caps are made from high-strength AL7075 aluminum, so the parts that carry axle loads, interface with the cassette and close out the hub ends are specified in a stronger alloy than the shell. Read together, the material list describes a design that seeks structural strength where it is needed while keeping overall mass low — consistent with the approximately 311.4 g set weight quoted for the complete set.

Two fitment facts should be checked against the frame and build before anything else. First, the brake interface is Center Lock, so rotor choice and mounting hardware must follow that standard. Second, the thru-axle dimensions are 12×100 mm at the front and 12×142 mm at the rear. These are the dimensions a road disc frame and fork must accept; a buyer working with a different spacing cannot use this set as specified. Both are stated product facts, not inferences, and they are the quickest way to confirm whether the MT-082F/R belongs on a given build sheet.

Freehub and Bearing Choices for Wheel Builders

Drivetrain compatibility is where the set shows the most configuration flexibility. ARC lists five freehub options: Shimano HG, Road Micro Spline, SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed. For a wheelset brand or OEM, that spread means one hub platform can be offered across several groupset ecosystems without changing the rest of the build, which simplifies range planning and spare-part logic. The right move is to match the freehub to the groupset the wheelset will actually ship with, and to confirm the exact option at specification stage rather than assuming a default.

Bearings are the second configuration choice. S&S steel, ENDURO and CeramicSpeed configurations are available, giving buyers a bearing tier to align with the price and positioning of the finished wheelset — a standard steel build for volume models, or a premium bearing option where the wheelset's market position calls for it. These are stated available configurations; the appropriate selection depends on the intended riding use and price band, and should be confirmed against the specific build.

Taken together, the MT-082F/R answers the original question with a coherent set of choices: 24H front and rear steel-spoke configuration, a patented one-piece ratchet in 36T or 54T, forged AL6061-T6 shell with AL7075 axle, freehub body and end caps, Center Lock discs, 12×100/12×142 mm thru-axle fitment, five freehub standards, three bearing tiers and a stated set weight of about 311.4 g. Buyers specifying a lightweight road disc wheelset should verify frame spacing, rotor standard and groupset freehub first, then choose ratchet and bearing tier to suit the model's positioning. The ARC MT-082F/R 24H Center Lock Road Disc Hub Set – 36T/54T Ratchet is therefore a sensible candidate to put on the evaluation list for that kind of build, and ARC's OEM/ODM hub work for brands, wheel manufacturers and distributors makes it a natural partner to discuss specification and customization with directly.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China