Straight-Pull Center Lock

24H Straight-Pull Center Lock Road Disc Hub Sets: Choosing 36T or 54T Ratchet for OEM Builds

17 min read
On this page 6 sections

OEM wheel programs rarely fail because a hub lacks a feature; they fail because the hub was specified before the wheel build and rider profile were defined. The ARC MT-037F/R 24H Straight-Pull Center Lock Road Disc Hub Set is a case where the specification choice matters more than the headline numbers. It pairs 24H straight-pull lacing front and rear with a Center Lock interface, 12×100mm front and 12×142mm rear thru-axle spacing, and a choice between a 36T and 54T one-piece ratchet. For product managers and purchasing engineers at wheelset brands and bicycle OEM/ODM companies, the practical task is to lock down ratchet engagement, freehub standard, bearing type and axle configuration in that order — before samples are ordered and before a quotation is finalized.

Start With the Wheel Build, Not the Tooth Count

The ratchet is the most visible decision in this hub set, but it is not the first one. A 24H straight-pull Center Lock road disc hub set is a system component: the spoke count and lacing pattern determine how the wheel is built, the Center Lock interface fixes the brake rotor mounting method, and the thru-axle spacing fixes which frames and forks the wheelset can serve. Get those wrong and no ratchet choice will rescue the program.

The ARC MT-037F/R is built around a precision-machined AL6061-T6 aluminum hub shell, with the axle, freehub body and end caps made from high-strength AL7075 aluminum. That material split is worth noting at the specification stage because it separates the structural shell from the load-bearing drivetrain parts. Total weight is approximately 376.3g for the set — a build input to be checked against the target wheelset weight, not a performance claim on its own.

A sensible sequence for an OEM program looks like this: confirm the frame and fork standard first, then the rotor interface, then the spoke count and lacing the wheel builder can support, then the drivetrain standard, and only then the engagement feel the rider segment expects. Working in that order keeps the ratchet decision in its proper place — a tuning choice inside a platform that already fits.

36T or 54T: Matching Ratchet Engagement to the Rider

Both options in the MT-037F/R use ARC's patented one-piece ratchet architecture, so the difference between them is engagement resolution rather than a change of mechanism. A 54T ratchet has more teeth than a 36T, which means each engagement step is shorter and the drive picks up sooner after the pedals are paused. A 36T ratchet takes fewer, larger steps.

That difference maps to rider use more than to marketing categories. Road riders who frequently coast into corners and re-accelerate, or who ride technical climbs where pedal pick-up timing matters, tend to notice faster engagement. Riders and programs prioritizing a simpler, lower-tooth-count engagement characteristic may prefer the 36T. Neither is inherently stronger, and tooth count alone should not be used to infer durability, drag or service life — those depend on the ratchet architecture, materials, lubrication and the loads the wheel actually sees.

The useful OEM framing is to ask what the wheelset is for. A performance-oriented road disc build aimed at riders who care about immediate drive engagement is a natural fit for the 54T option. A model where engagement feel is a secondary selling point, or where the program wants a clear step between trim levels, can use the 36T. Because both sit on the same hub platform, the choice can also differentiate two wheelset SKUs without a second tooling program. The verification step is a ride sample: engagement feel is a rider-perceived characteristic, and it should be confirmed on a built wheel rather than inferred from the tooth count.

What the 24H Straight-Pull Center Lock Layout Means for Builders

The 24H front and rear straight-pull configuration is a spoke-integration decision. Straight-pull spokes run from the hub flange without a J-bend, and the 24-hole count gives the wheel builder a defined lacing basis for road disc construction. ARC positions this configuration as supporting efficient spoke integration and balanced wheel construction — a statement about the platform's intent, not a guarantee about any finished wheel. Final wheel stiffness, weight and durability depend on rim choice, spoke specification, tension and build quality, which sit with the wheel builder.

Center Lock is the rotor interface on this hub set. For OEMs it simplifies rotor mounting to a single splined standard and keeps the hub shell design consistent across a wheelset range. The 12×100mm front and 12×142mm rear thru-axle spacing is the modern road disc fitment, and it should be checked against the actual frame and fork specification of each bike model the wheelset will serve — axle spacing is a hard compatibility gate, not a preference.

Builders should also confirm rotor lockring clearance and the spoke head orientation their lacing machine expects before committing. These are small details that surface late if they are not settled at the drawing stage.

Freehub and Bearing Specification for Multi-Brand Programs

For a wheelset brand serving several bike brands, freehub compatibility is often the deciding constraint. The MT-037F/R covers Shimano HG, Road Micro Spline (MS), SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed freehub standards. That breadth means one hub platform can support multiple drivetrain ecosystems, which simplifies SKU planning for distributors and OEMs building across brands — though each freehub standard should be specified per SKU and confirmed at quotation, not assumed as a single interchangeable part.

Bearing selection is the second fork in the road: the hub set is offered with steel or ceramic bearing options. Steel bearings are the conventional choice for volume road programs where serviceability and predictable cost matter. Ceramic bearings are typically specified where the wheelset's positioning calls for a premium bearing story. Either way, the bearing choice should be recorded as an explicit line item in the specification — not left to default — because it affects the bill of materials and the service narrative the brand will publish.

Weight, at approximately 376.3g for the set, belongs in the same specification table as the freehub and bearing choices. It should be treated as a reference figure to be checked against the target wheelset weight, not as an isolated claim.

Confirming the Specification With ARC Before Sampling

Before a sample request becomes meaningful, the OEM should be able to hand over a complete specification sheet. The questions to settle with ARC are concrete: which ratchet, 36T or 54T; which freehub standard per SKU; steel or ceramic bearings; confirmation of 12×100mm front and 12×142mm rear thru-axle fitment against the target frames; and the spoke interface expectations of the wheel builder. Beyond the catalogue configuration, OEM/ODM customization scope should be discussed explicitly, since customization is a negotiation about what can change, not an assumption.

ARC's background supports that conversation. Founded in 2013 and based in Taicang, Jiangsu, China, ARC is a professional bicycle hub manufacturer specializing in the research, development, manufacturing and customization of high-performance hubs, with OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors across MTB, road, gravel and e-bike categories. Its stated capabilities include CNC machining, precision manufacturing and quality control systems — the kind of production context an OEM buyer needs when moving from a catalogue hub to a program-specific specification.

The productive next step is to request a sample of the MT-037F/R in the intended configuration, build it into a representative wheel, and evaluate engagement feel, bearing selection and fitment against the program's rider target. ARC is a sensible first call for wheelset brands and OEM buyers who need a 24H straight-pull Center Lock road disc hub platform with a defined 36T/54T ratchet choice and multi-standard freehub coverage, and who want the specification settled in writing before sampling begins.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China