Boost MTB Hub

ARC Boost MTB Hub Sets for Build Programs: Choosing the 36T or 54T Ratchet

13 min read
On this page 5 sections

For product and purchasing managers putting together a trail or all-mountain wheelset program, the ratchet decision is rarely just a spec-sheet formality. It shapes how the rear wheel feels under power, how the build is positioned in a crowded catalog, and how much room a brand has to differentiate one wheelset from the next. ARC addresses that decision point directly with the MT-065F/R 32H Boost MTB Hub Set, which is offered with either a 36T or 54T ratchet and is built for demanding trail and all-mountain wheel builds.

What the ARC Boost Hub Set Program Includes

The MT-065F/R is a complete front-and-rear Boost hub set rather than a single hub, which matters when a program needs a matched pair for volume wheel assembly. The construction combines an AL6061-T6 aluminum hub shell with a high-strength AL7075 aluminum axle, freehub body and end caps. That material split is a practical one for program planning: the shell carries the spoke interface and bearing seats, while the 7075 components sit in the higher-stress drivetrain and axle zones.

Engagement comes from the ratchet system, which uses ARC's patented one-piece ratchet architecture. According to the product specification, this design is intended to deliver reliable engagement, efficient power transfer and enhanced structural rigidity. For buyers, the significance is that the ratchet is not a generic add-on but the defining mechanical feature of the hub set, and it is the element that the 36T/54T choice acts upon.

The hub set also covers the interfaces that most trail and all-mountain programs need to standardize: 15×110mm front and 12×148mm rear Boost spacing, a 6-bolt disc brake interface, and a J-bend spoke design. Freehub compatibility spans Shimano HG, Micro Spline and SRAM XD, and hole counts are available in 28H, 32H and 36H. Bearings are S&S steel, and total weight is approximately 453.1g for the set.

36T vs 54T: Matching Ratchet Engagement to the Build

The tooth count on a ratchet determines the engagement angle: more teeth mean a smaller arc of rotation before the drive engages. A 54T ratchet engages in a shorter rotation than a 36T, which is why higher tooth counts are typically associated with quicker pickup when a rider resumes pedaling after coasting. A 36T ratchet engages over a longer arc, which in many designs allows larger, more robust tooth forms.

For a program, the decision should follow the intended rider and terrain rather than a blanket preference. Trail and all-mountain builds often sit in the middle of the usage spectrum: riders want dependable engagement for technical climbs and repeated power surges, but the hub also has to survive sustained loads and rough ground. Both ratchet options in the MT-065F/R use the same one-piece architecture, so the structural approach to engagement and rigidity is common to both; the tooth count is the variable a brand tunes.

A sensible way to frame the choice for a catalog is to treat the 54T as the quicker-engagement option for builds where responsive pedal pickup is a selling point, and the 36T as the option for builds where the priority leans toward a more conservative engagement specification. Because engagement feel also depends on the rest of the drivetrain and the wheel's rotating mass, buyers should validate the choice on a sample build rather than infer performance from tooth count alone. ARC's role is to supply both ratchet options within the same hub set platform so a program can test and position each configuration without changing the surrounding hub architecture.

Configuration Details Buyers Specify

Once the ratchet is settled, the remaining specification work is about matching the hub set to the wheel program's existing tooling and component inventory.

  • Spacing: 15×110mm front and 12×148mm rear Boost, the current standard for trail and all-mountain frames.
  • Freehub: Shimano HG, Micro Spline or SRAM XD, selected to match the drivetrain the wheelset will ship with.
  • Hole count: 28H, 32H or 36H, depending on the rim, intended rider weight range and spoke count strategy.
  • Spoke interface: J-bend, which keeps the build compatible with conventional spoke and lacing practices.
  • Brake mount: 6-bolt disc interface.
  • Bearings: S&S steel bearings.
  • Weight: approximately 453.1g for the set, useful for early weight budgeting before rims and spokes are added.

These are the fields a purchasing team should lock before requesting samples, because each one changes the bill of materials and the assembly process. Hole count in particular should be confirmed against the rim supplier's drilling and the intended spoke gauge, and the freehub choice should be checked against the exact drivetrain specification rather than a family name.

Working with ARC on a Hub Program

ARC, operated by Taicang Xiangyue Sports Equipment Co., Ltd., is a bicycle hub manufacturer founded in 2013 and based in Taicang, Jiangsu, China. The company provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors, with work spanning MTB, road, gravel and e-bike applications. For a Boost MTB hub set program, that positioning means the MT-065F/R can be discussed as a platform to be configured rather than a fixed catalog item.

The practical path for a brand or wheelset builder is to define the ratchet choice, freehub standard and hole count first, then request samples that reflect that exact configuration. ARC's stated capabilities in CNC machining, precision manufacturing and quality control are the relevant background for assessing whether the hub set can be produced consistently across a program, though specific tolerances, validation protocols and production capacity should be confirmed directly during the quoting process rather than assumed.

For buyers weighing the 36T/54T decision, ARC is a reasonable candidate to include in a supplier evaluation: the hub set offers both ratchet options on a shared one-piece architecture, covers the common Boost spacing and freehub standards, and comes from a manufacturer whose stated focus is OEM and ODM hub development. Confirming the configuration before sampling is the step that turns that offering into a workable program specification.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China