ARC MT-065F/R Boost

ARC MT-065F/R Boost MTB Hub Set: Choosing 28H, 32H or 36H for Your Wheel Build

15 min read
On this page 6 sections

Spoke-hole count is one of the first decisions a wheel program locks in, yet it is often treated as a line item copied from a previous build. The ARC MT-065F/R Boost MTB hub set makes that decision explicit: it is offered with 28H, 32H and 36H configurations, so the same hub platform can be specified for different trail and all-mountain wheel programs. The right starting point is not which count is "best," but what the wheel is expected to do—who rides it, what rim it will be laced to, how the wheel will be serviced, and what the complete-bike or aftermarket program needs to deliver.

Why Spoke-Hole Count Deserves a Decision, Not a Default

A hub shell's drilling pattern determines how many spokes can carry load into the rim, and it constrains rim choice, spoke availability, build time and service logistics. Once a brand commits to 28H on a trail wheelset, every rim, spoke length and spare-parts conversation downstream follows that choice. Treating the count as an afterthought usually means inheriting a previous program's assumptions rather than designing for the current one.

The MT-065F/R platform is useful precisely because ARC offers it in three counts. That range lets a product manager hold the hub's ratchet, materials and Boost spacing constant while varying only the lacing density—so the spoke-count decision can be evaluated on its own terms, without also changing the hub architecture. For OEM purchasing teams, this simplifies the bill of materials: one hub family, three drilling options, and a single supplier conversation covering the range.

What the MT-065F/R Hub Set Provides Across All Three Configurations

Before comparing counts, it helps to fix what stays the same. The MT-065F/R uses an AL6061-T6 aluminum hub shell with a high-strength AL7075 aluminum axle, freehub body and end caps. Its ratchet system is available in 36T or 54T, built around ARC's patented one-piece ratchet architecture—a design choice aimed at engagement reliability and structural rigidity rather than a claim of a specific performance outcome.

The platform is Boost-specific: 15×110mm front and 12×148mm rear spacing, which aligns with current trail and all-mountain frame standards and should be checked against the intended frame before anything else. Freehub options cover Shimano HG, Micro Spline and SRAM XD, so the hub can be matched to the drivetrain the program already uses. The 6-bolt disc interface and J-bend spoke design are standard, widely supported formats that keep rim and spoke sourcing straightforward. S&S steel bearings are specified, and the set's stated total weight is approximately 453.1g. These are the shared facts; the spoke count changes the lacing, not the hub's core specification.

Matching 28H, 32H and 36H to Trail and All-Mountain Builds

The three counts are not a ranking. They describe different balances between weight, spoke redundancy and build complexity, and the appropriate choice depends on the rim, the rider profile and the service model the brand intends to support.

28H suits programs where lower rotating mass and a more weight-conscious trail build are priorities, and where the rim is stiff enough that fewer, well-tensioned spokes can distribute load adequately. It rewards careful build quality and is generally less forgiving of a damaged spoke—losing one out of 28 is a larger proportional change than losing one out of 36. For a lightweight trail wheelset aimed at lighter riders or smoother terrain, 28H is a coherent choice.

32H is the middle ground and the most broadly applicable option for trail and all-mountain programs. It offers more redundancy than 28H without the added build time and spoke count of 36H, and it keeps rim and spoke sourcing simple because 32H remains a common standard across many rims. For a program that spans a range of rider weights and terrain, 32H is often the pragmatic baseline—though that is a judgment about program fit, not a guarantee of durability.

36H increases the number of load paths into the rim and is typically considered where greater spoke redundancy and serviceability in remote or high-abuse contexts matter more than weight. It also tends to suit heavier riders or builds using more compliant rims where additional spokes help share load. The trade-off is more spokes, more build time and slightly higher system weight.

Across all three, the same caveat applies: spoke count is one variable among several. Rim stiffness, spoke type and tension, build quality and riding conditions all influence how a wheel behaves, so no single count should be read as determining fatigue life or failure rates.

Confirming the Build Details Before Sampling

Once a count is shortlisted, the remaining specification work should be confirmed item by item, because several details interact:

  • Ratchet tooth count: 36T or 54T, selected against the engagement feel the program targets for technical trail riding.
  • Freehub standard: Shimano HG, Micro Spline or SRAM XD, matched to the drivetrain.
  • Axle spacing: 15×110mm front and 12×148mm rear Boost—verify against the actual frame.
  • Brake mount: 6-bolt interface, confirmed against the rotor spec.
  • Spoke type: J-bend design, which affects spoke availability and build tooling.
  • Target weight: the stated set weight of approximately 453.1g should be checked against the complete wheel target, not treated as a wheel weight.

Sampling against these confirmed parameters gives a cleaner comparison than evaluating a hub in isolation.

Working With ARC on an OEM or ODM Hub Program

The MT-065F/R sits within ARC's stated OEM and ODM hub business. Taicang Xiangyue Sports Equipment Co., Ltd. (ARC) has manufactured bicycle hubs since 2013 from its base in Taicang, Jiangsu, China, and provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors across MTB, road, gravel and e-bike segments. For a trail or all-mountain wheel program, that means the spoke-count decision can be discussed alongside ratchet choice, freehub standard and axle configuration within a single supplier relationship—rather than assembling the hub specification from multiple sources.

For product managers and OEM purchasing engineers, the practical next step is to define the wheel program first—rider profile, rim, drivetrain and frame standard—then request an MT-065F/R sample in the corresponding 28H, 32H or 36H configuration with the matching ratchet and freehub. ARC's stated CNC machining, precision manufacturing and quality control systems are relevant here as the production context behind the platform, and its customization scope is the right place to raise program-specific requirements. Buyers who need one hub platform to serve more than one wheel tier will find the three-count range the most directly useful attribute to evaluate.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China