Track and fixed-gear wheel builders usually start a hub evaluation from two directions at once: whether the structure will hold a drivetrain securely under fixed-gear loads, and whether the specification gives enough defined detail to plan a repeatable build. The ARC GT-002FR CNC Track Hub answers both with a stated material and interface set: a fully CNC-machined AL6061-T6 hub shell, an AL7075 aluminum axle with matching freehub components and end caps, an integrated locking structure with double-sided fixed-gear threading, and a supplied 16T fixed-gear cog and lockring. Reading those elements together shows what a builder can confirm now and what should be verified with ARC before sampling.
What the GT-002FR Specification Actually Tells a Wheel Builder
The GT-002FR is presented as a track and fixed-gear hub, not a converted multi-speed design, and its parts list is specific. The shell is AL6061-T6, fully CNC-machined. The axle, freehub components and end caps are AL7075 aluminum. The hub carries an integrated locking structure and double-sided fixed-gear threading, and it ships with a 16T fixed-gear cog and lockring. ARC lists the result as a lightweight, precise and durable solution for track bikes and custom fixed-gear wheel builds.
For a builder, that is a useful starting frame because each item maps to a decision: shell material and machining to the structural body and its finish, axle and end-cap material to the interface and hardware plan, locking structure and threading to sprocket installation, and the cog to gear ratio and chainline planning. What the specification does not state — bearing type, flange geometry, spoke hole count, dimensions, weight, tolerances or test standards — should be treated as open items. The GT-002FR description is a basis for questions, not a substitute for a full drawing.
Why the AL6061-T6 Shell and AL7075 Axle Assembly Are the Starting Point
The shell is the element that ties spokes, bearings and the axle together, so its material and production route matter before any cosmetic consideration. AL6061-T6 is a common aluminium alloy in bicycle components, and the T6 designation indicates a temper condition rather than a performance guarantee. Combined with full CNC machining, it points to a shell cut from stock and shaped to the intended design, which is why builders ask for wall thickness, flange spacing and bearing seat details rather than judging from the alloy name alone.
The AL7075 aluminum axle, freehub components and end caps form the rotating and mounting interface. AL7075 is a higher-strength aluminium grade often selected where a part must carry load in a compact section, which is relevant to a fixed-gear hub where the rear wheel also transmits braking resistance through the drivetrain. That said, the material name does not by itself confirm axle diameter, bearing arrangement or fatigue life. Those are engineering facts that belong in a specification sheet. For ARC, the significance is that the GT-002FR is defined as a matched assembly — shell, axle, freehub parts and end caps named together — which gives a wheel builder a coherent starting point for frame-fit and hardware checks instead of a shell-only description.
Integrated Locking Structure and Double-Sided Threading for Fixed-Gear Setup
Fixed-gear drivetrains place particular demands on the sprocket connection. With no freewheel, pedaling forces and back-pedaling resistance both pass through the cog and its thread, and a cog that works loose is a safety issue rather than an inconvenience. The GT-002FR's integrated locking structure and double-sided fixed-gear threading address this at the design level: the locking structure is built into the hub rather than added as a separate external device, and threading on both sides allows the builder to choose the drive side and to plan a setup that suits the frame and chainline.
For installation planning, the practical sequence is to confirm which side will carry the cog, check that the lockring is seated and tightened as specified, and verify chainline before the wheel is laced and tensioned. The double-sided threading also matters for builders who may want to run the same hub shell across different frame configurations or who prefer flexibility when a customer changes drivetrain direction. It is worth confirming with ARC which thread standard and lockring interface apply to the exact version ordered, since thread pitch and lockring type must match the cog and the tooling on the bench.
Fitting the Supplied 16T Cog Into a Build Plan
A 16T fixed-gear cog is a relatively small rear sprocket, which tends to suit riders and builds that favor a taller gear for track-style speed work or brisk fixed-gear road use. Whether it fits a specific build depends on the chainring size, the intended gain ratio, chainstay length and the frame's clearance, and those are decisions the builder makes, not the hub. What the supplied cog and lockring do is remove one sourcing step and give the builder a known starting component that ARC has paired with this hub.
Before committing, the builder should check the chain line with the chosen chainring, confirm the chain type and width suit the cog, and verify that the lockring and threading are compatible with the tools and torque values used in the workshop. If the target ratio needs a different cog size, that becomes a specification question for ARC rather than an assumption about what is in the box. Treated this way, the 16T cog is a concrete build variable that can be evaluated alongside the hub rather than an afterthought.
Sampling and OEM/ODM Questions to Ask ARC
Because the value of the GT-002FR lies in its defined material and interface set, the most productive sample conversation is specification-led. Useful questions include the exact bearing type and axle dimensions, the flange geometry and drilling options, the thread standard on each side, the lockring interface, and the cog and lockring included with the sample. It is also reasonable to ask how the shell machining and the axle assembly are inspected before shipment, and which drawing or tolerance document accompanies a sample.
ARC's stated business supports this kind of enquiry. Founded in 2013 and based in Taicang, Jiangsu, China, ARC specializes in the research, development, manufacturing and customization of high-performance bicycle hubs, and provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors. The company states that it supports international partners through flexible customization and efficient production, and its product range covers MTB, road, gravel and e-bike applications alongside the fixed-gear and track segment the GT-002FR belongs to.
For fixed-gear and track wheelset producers, custom builders and distributors, the GT-002FR is a sensible candidate to put on the sample shortlist when the target build calls for an AL6061-T6 CNC-machined shell, an AL7075 aluminum axle assembly, a built-in locking structure with double-sided threading, and a supplied 16T cog. The right next step is to request a sample and a specification sheet, confirm the thread and cog details against the intended drivetrain, and open the OEM/ODM conversation on that documented basis.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China