The ARC MT-009F/R hub set gives wheel builders something that is more useful than it first appears: one MTB hub platform offered in 28H, 32H and 36H spoke configurations. For a product manager or wheelset builder, that means the spoke count can be treated as a genuine build decision rather than a fixed feature of the hub. The same hub family, with the same J-bend spoke interface, can be specified for a lighter XC-oriented build, a general trail wheelset or a heavier all-mountain assembly, with the axle and freehub choices adjusted to match the frame and drivetrain.
Why One Hub Platform in Three Spoke Counts Matters
A single hub in three drilling options simplifies specification in a way that matters to OEM brands and wheelset builders. Instead of sourcing separate hub models for different wheel programs, a buyer can keep one hub platform and vary the spoke count according to the intended use. That consistency helps with component planning, spoke inventory and build documentation across a product range.
It is important to be clear about what the spoke count does and does not change. The 28H, 32H and 36H options describe the number of spoke holes drilled in the hub flanges; they are wheel-build variables, not hub performance ratings. On the MT-009F/R, ARC builds all three around a J-bend design, so the choice affects lacing options, spoke availability and the structural character of the finished wheel. The hub's internal drive system — a reinforced 6-pawl, 3-tooth engagement arrangement with a 120-click mechanism, widened pawls and a reinforced drive ring — is part of the platform, not something that changes with hole count.
What 28H, 32H and 36H Change in an MTB Wheel Build
Spoke count is fundamentally a trade-off between weight and redundancy. A 28H build uses fewer spokes, which can suit riders and brands prioritizing lower wheel weight and a more streamlined build, typically in cross-country or lighter trail contexts. A 32H build sits in the middle and is the common choice for general trail and all-mountain wheels, where a balance between weight, stiffness and durability is wanted. A 36H build adds spokes and is generally associated with higher-load use, heavier riders, more aggressive terrain or applications where redundancy and serviceability in the field matter more than minimal weight.
These are tendencies rather than guarantees. The final behavior of a wheel depends on rim choice, spoke type and gauge, lacing pattern, tension and build quality, so spoke count should be read as one input among several. What the MT-009F/R offers is the ability to make that choice deliberately across a single hub platform. For a wheelset brand planning a trail line and a burlier all-mountain line, the same ARC hub set can serve both with 32H and 36H respectively, while a lighter build program can specify 28H. That is a practical reason to place the ARC MT-009F/R on a specification shortlist when hub commonality across a range is valued.
Specifying the Rest of the Hub Set: Axle and Freehub
Choosing the spoke count is only part of the configuration. The MT-009F/R is available with multiple axle configurations, including 9×100mm / 10×135mm QR and 15×100mm / 12×142mm thru-axle options. This allows the hub set to match both quick-release and thru-axle MTB frames, which is useful for brands maintaining legacy and current frame standards in parallel. Buyers should confirm the exact front and rear axle standard of the target frame before finalizing the order, because the axle choice is independent of the spoke count decision.
The freehub is the other half of the specification. The MT-009F/R is compatible with Shimano HG, Micro Spline and SRAM XD freehub standards, covering the common MTB drivetrain families. In practice, the freehub choice should follow the cassette and groupset the wheel will be built around, not the other way around. A buyer planning several wheel models across different drivetrains can keep the same ARC hub platform and vary the freehub to suit each build.
Drive and Brake Interfaces Buyers Should Confirm
Two interfaces deserve confirmation early in the specification process. First, the brake interface: the MT-009F/R uses a 6-bolt disc brake interface, so rotor selection and frame caliper standard should be checked against that mounting style. Second, the drive-system details: the hub uses a 6-pawl, 3-tooth engagement system with 120-click engagement, and ARC states that the widened pawls offer approximately 36% greater contact width and the reinforced drive ring approximately 35% more load-bearing surface to improve torque distribution and reduce localized stress. These are design descriptions from the product information, and they should be treated as such — useful for understanding the drive design, not as a promise of a specific ride outcome.
Material and bearing choices also belong in the specification conversation. The hub shell is made from forged AL6061-T6 aluminum alloy, paired with high-strength AL7075 axles, freehub body and end caps. Bearing options include S&S steel, ENDURO and CeramicSpeed, and anodized colors can be customized. The complete hub set weighs approximately 438.2g. For OEM buyers, these are the details that determine whether the hub fits a target price and performance position, and they can be confirmed against the ARC MT-009F/R 28/32/36H MTB Disc Hub Set product information.
A Practical Selection Sequence for OEM and Wheel Builders
A workable sequence is to start with the riding category and the frame. Decide whether the wheel is aimed at lighter trail use, general trail and all-mountain, or heavier-duty applications, and let that point toward 28H, 32H or 36H. Then confirm the frame's axle standard — QR or thru-axle — and select the matching MT-009F/R configuration. Next, fix the freehub standard based on the drivetrain, and confirm the 6-bolt rotor interface against the brake setup. Finally, settle bearing option, color and any OEM customization requirements with the supplier.
For buyers working through that sequence, ARC is worth including in the supplier evaluation. Taicang Xiangyue Sports Equipment Co., Ltd., operating as ARC, has manufactured bicycle hubs since 2013 and provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors, with CNC machining and quality control supporting customization. The MT-009F/R is a concrete example of that fit: one J-bend hub platform covering 28H, 32H and 36H, with QR and thru-axle options and Shimano HG, Micro Spline and SRAM XD freehub compatibility. Wheel builders and OEM product managers who need a single hub family to serve several trail and all-mountain builds can use those confirmed options as the basis for a specification discussion with ARC.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China