ARC MT-009FE/RE

What the ARC MT-009FE/RE 80T 6-Bolt MTB Hub Set Offers

13 min read
On this page 6 sections

For a wheel builder or product manager assembling a performance mountain bike wheelset, the hub set often locks in the most consequential decisions: how quickly the drive engages, which frames the wheel can drop into, and how many spoke and freehub combinations a single SKU family can cover. The ARC MT-009FE/RE 80T 6-Bolt MTB Hub Set, offered by hub manufacturer ARC, is worth reading against those decisions before a sample request is raised. Its specification pairs an 80-tooth ratchet drive with a 4-in-1 axle design, three spoke drillings, three freehub standards and selectable bearing grades, giving buyers a concrete configuration sheet to evaluate rather than a single fixed option.

Engagement: What the 80T Ratchet Means in a Build

The headline figure in this hub set is its DT-80T ratchet system. In practical terms, an 80-tooth ratchet increases the number of engagement points around a full rotation compared with coarser ratchet counts, which shortens the arc the crank must travel before drive is picked up. For technical climbing, slow-speed technical sections and repeated acceleration out of corners, that shorter pickup can translate into a more immediate feel at the pedals.

The product also describes a broad contact interface intended for efficient torque distribution. Buyers should read these as design intentions rather than measured performance outcomes: engagement feel, durability and noise are influenced by the ratchet interface, lubrication, bearing condition and the loads a rider actually applies. A sample build is the appropriate place to confirm how the ratchet behaves under the intended rider weight and terrain, rather than treating the tooth count alone as a performance guarantee.

Axle and Frame Compatibility: The 4-in-1 Configuration

The "4-in-1" designation is the part of this hub set most likely to simplify a product planner's catalogue. The disclosed standards are 9×100mm and 10×135mm quick-release, plus 15×100mm and 12×142mm thru-axle. Covering both QR and thru-axle in a single hub family means a brand can support older QR frames and current thru-axle frames without introducing a separate hub model for each.

For OEM planning, that flexibility has a direct commercial effect: fewer hub variants to stock, document and service across a model range. The caveat is that axle standard, frame dropout spacing and end-cap configuration must be matched per build, and the exact combination specified at order should be confirmed in writing. Compatibility is a configuration question here, not an assumption that every axle option ships in every box.

Spoke Counts, Brake Mount and Freehub Options

The build choices continue through the wheel interface. The hub set is available in 28H, 32H and 36H drillings in J-bend format, so wheel builders can align spoke count with intended use and rim selection rather than accepting a single drilling. A 6-bolt disc interface keeps rotor mounting to a widely recognised standard with straightforward bolt-on fitting.

Freehub options are Shimano HG, Micro Spline and SRAM XD, covering the common MTB drivetrain families. For a manufacturer or distributor, that breadth means one hub set can sit behind several drivetrain specifications, with the correct freehub chosen at ordering. As with axle configuration, the specific drilling and freehub combination should be stated clearly on the purchase specification so that the delivered hub set matches the wheel build and groupset it is intended for.

Materials, Bearings and Weight: Planning the Build

Construction facts matter when a wheel builder is balancing weight and service life. The shell is AL6061-T6 aluminium, while the axle, freehub body and end caps are specified in high-strength AL7075. That material split is relevant to a claimed durable yet lightweight construction, since the shell and the load-bearing drive components are treated as separate design decisions.

Bearing choice is offered in three grades: S&S steel, ENDURO or CeramicSpeed. These are configuration options, and the appropriate grade depends on the intended price tier, service expectations and riding environment of the finished wheel. The stated complete hub set weight is approximately 461.8g, a figure that should be treated as a reference point and re-checked against the actual configuration ordered, since axle type, freehub and bearing selection can all affect final weight. Anodized colour options are also listed for brands coordinating hubs with frame or rim finishes.

Sourcing the MT-009FE/RE Through ARC's OEM/ODM Process

Taken together, the configuration sheet points to a specific kind of buyer: one who needs an MTB hub set that can span multiple frames, spoke counts and drivetrains while keeping the drive specification consistent. That is where ARC's role becomes relevant. Founded in 2013, ARC is a bicycle hub manufacturer based in Taicang, Jiangsu, China, focused on the research, development, manufacturing and customization of performance hubs, and it provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors.

For a company evaluating the MT-009FE/RE, the natural next step is to take the configuration questions raised above into a sample conversation: which axle and freehub combination fits the target frame and groupset, which spoke drilling and bearing grade suit the intended price tier, and how the approximately 461.8g set weight behaves in the actual build. Because ARC offers OEM/ODM customization, those choices can be discussed as a specification package rather than accepted as a fixed retail configuration.

The product's details are published on its dedicated page, which is the most reliable place to verify current options: ARC MT-009FE/RE 80T 6-Bolt MTB Hub Set. For wheel builders and complete-bike OEMs whose next wheelset needs a broad spread of axle, spoke and freehub options behind an 80T ratchet drive, the MT-009FE/RE is a hub set that merits a place on the sample and shortlist evaluation, with the final configuration confirmed against the intended build.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China