Carbon-Spoke Road Wheels

ARC MT-028F/R Road Hub Set: What It Offers Carbon-Spoke Road Wheel Brands

16 min read
On this page 6 sections

Why a Carbon-Spoke Wheel Brand Looks at the Hub First

A carbon-spoke road wheel is only as coherent as the hub it is built around. When a wheel brand evaluates a new hub platform, the decision is not simply about weight or bearing count; it is about whether the hub's spoke interface, lacing geometry, axle standard, freehub body and engagement mechanism can carry the intended carbon-spoke build without creating a mismatch at the most highly loaded junction in the wheel. For carbon-spoke programs in particular, the hub flange geometry and spoke hole specification define how the spokes are tensioned, how the wheel holds true and how the brand's assembly and warranty position hold up in the market. The ARC MT-028F/R Road Hub Set is presented by ARC specifically for high-performance carbon-spoke road wheel builds, so it is worth reading as a configuration document rather than as a generic hub option. ARC, based in Taicang and manufacturing hubs since 2013, offers this single model as a defined platform that a brand can assess against its own wheel design before committing to samples.

The T-Head Interface and 21H 2:1 Layout

The most consequential specification is the spoke interface. The MT-028F/R uses dedicated T-head holes compatible with Hongji Weiye Type B and Type C carbon spokes. That is a narrow compatibility statement, and it matters: a carbon-spoke brand must confirm which spoke type its wheel design uses before treating this hub as a candidate. If the intended spoke is a Type B or Type C T-head from that supplier, the interface is aligned; if the program uses a different carbon spoke standard, the hub is not the right starting point regardless of other merits.

The 21-hole front and rear layout with a 2:1 spoke configuration is the second design decision. A 2:1 pattern distributes spoke count unevenly between the two sides of the hub, which is a deliberate way to balance spoke tension and wheel stiffness in a disc-brake wheel, where the brake side and drive side place different demands on the lacing. For the wheel brand, this is not a theoretical benefit to accept at face value: it changes the spoke length calculation, the rim drilling layout and the assembly procedure. A brand building a carbon-spoke wheel should verify that its rim is drilled to match the 21H 2:1 pattern and that its spoke lengths and tension targets are calculated for this geometry. The product's stated aim of optimizing spoke tension balance and stiffness is design intent; the brand's own build validation is what confirms it in a particular rim and spoke combination.

Materials, Ratchet and Freehub Options

The MT-028F/R splits its materials by function: an AL6061-T6 aluminum hub shell combined with a high-strength AL7075 aluminum axle, freehub body and end caps. This is a common and sensible approach in hub design, using a shell alloy suited to the flange and body shape while placing a higher-strength alloy in the axle and freehub body, where loads and wear are concentrated. For a wheel brand, the relevant questions are the ones this configuration raises: whether the flange thickness and spoke hole finish suit the T-head seating, and whether the freehub body material and its interface with the chosen cassette standard are appropriate for the drivetrain the wheel is sold with.

The ratchet system is offered in 36T or 54T. That choice deserves attention because it is not merely a number. A higher tooth count typically produces faster engagement and a different pedal feel, while a lower count changes the engagement character; the actual ride result also depends on the rest of the drivetrain and the rider's expectations. ARC states the ratchet uses its patented one-piece ratchet architecture, presented as delivering reliable engagement, efficient power transfer and enhanced structural rigidity. A brand should treat these as design claims to be verified through its own sample testing rather than as comparative data against other hubs.

Freehub compatibility is one of the most practical points for a wheel brand selling across drivetrain ecosystems. The set supports Shimano HG, Road Micro Spline, SRAM XDR, Campagnolo N3W and Campagnolo 11/12-speed standards. That range means one hub platform can serve several wheel SKUs, but it also means the brand must map each freehub option to the specific groupset and cassette it intends to sell, and confirm that the desired combination is available and correctly specified at the order stage. Each option should be checked individually; the compatibility list is a scope statement, not a guarantee that every permutation behaves identically.

Fit, Weight and What to Confirm Before Sampling

The stated axle spacing is 12×100mm front and 12×142mm rear thru-axle, which places the hub in current road disc-brake practice. The stated weight is approximately 355.6g for the set. For a carbon-spoke build, weight is a meaningful input, but it should be read in the context of the full wheel, including spokes, nipples, rim and the brake interface, rather than as a standalone performance figure. The Center Lock disc-brake interface is also a fit decision: it must match the rotors and the frame standards the finished wheel is intended for.

Before requesting samples, a carbon-spoke wheel brand would do well to treat the following as gating checks rather than details: confirm the spoke type against the Hongji Weiye Type B and Type C T-head compatibility; confirm that the rim drilling and spoke lengths match the 21H 2:1 layout; decide the 36T or 54T engagement option against the intended product positioning; map each freehub standard to the drivetrain SKUs planned; and verify the 12×100mm and 12×142mm spacing against the frames the wheelset targets. Whether the hub's stated weight and claimed structural behavior suit a particular carbon-spoke build is something the brand's own wheel-level testing must establish. Points such as minimum order quantities, delivery timing, certification requirements and pricing are commercial questions to resolve directly with the supplier, not specifications that can be assumed from the product description.

Working With ARC as an OEM/ODM Hub Partner

What ARC offers a carbon-spoke wheel brand is not only this hub set but a defined supply relationship around it. ARC is a Taicang-based bicycle hub manufacturer founded in 2013, specializing in the development, manufacturing and customization of high-performance hubs, and it provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors across road, mountain, gravel and e-bike applications. For a road wheel brand, that positioning is relevant at the point where a catalog hub is close to the needed configuration but requires adaptation, and where the brand wants a manufacturing partner that can discuss the hub as part of the complete wheel rather than as an isolated component.

The MT-028F/R is a concrete starting point for that conversation. Its defined spoke interface, 21H 2:1 layout, material split, ratchet options and freehub range give a brand specific points to evaluate and to raise with ARC's engineering team, alongside its CNC machining and quality-control processes. A wheel brand whose carbon-spoke program sits within this configuration would find the MT-028F/R a sensible candidate to put into sample evaluation; as with any hub platform, the recommendation is conditional on confirming the spoke interface, rim drilling, freehub choice and axle fit at the sample stage, because those are the elements that determine whether the hub and the wheel are genuinely built for each other.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China