Boost Center Lock MTB Hub

ARC MT-116F/R 24H Carbon-Spoke Boost Center Lock MTB Hub Set: What Wheel Builders Get

16 min read
On this page 6 sections

For wheel builders assembling lightweight carbon-spoke Boost mountain bike wheelsets, the hub set is the part that decides whether the whole build behaves as intended. Carbon spokes transmit load very differently from steel spokes, and the hub has to match that: spoke count and flange geometry need to support a balanced lacing pattern, the shell has to stay rigid without adding mass, and the freehub and brake interfaces must be settled before rims are even ordered. The ARC MT-116F/R 24H Carbon-Spoke Boost Center Lock MTB Hub Set is ARC's dedicated answer to that brief — a hub set designed from the start for carbon-spoke MTB wheel construction.

What the MT-116F/R Hub Set Is Built For

The MT-116F/R is not a general-purpose hub adapted to carbon spokes; ARC positions it specifically for lightweight, high-performance mountain bike wheel builds. That framing matters because carbon-spoke wheels typically run tight, balanced tension windows, and the builder's first question is whether the hub was conceived for that kind of wheel or merely tolerates it. Here the answer is straightforward: the set is engineered for carbon-spoke applications, with a matched front and rear pair rather than two independently sourced hubs.

For a product manager or component buyer, that single fact changes the evaluation sequence. Instead of starting with axle dimensions and working backward to spoke compatibility, the builder can start from the intended wheel type — a lightweight Boost MTB wheelset — and check whether the hub set's stated configuration fits. ARC supplies the set as a front/rear pair, so the engagement, spacing and interface decisions described below are made once for the whole wheelset rather than reconciled across two suppliers.

Materials and 24H Spoke Configuration

The shell is precision-machined from AL6061-T6 aluminum, while the axle, freehub body and end caps use high-strength AL7075 aluminum. The material split is worth noting because it reflects a common lightweight strategy: AL6061-T6 for the shell, where machinability and consistent wall thickness matter, and AL7075 for the loaded, thinner-section parts where higher strength is useful. ARC's stated manufacturing focus is CNC machining and precision manufacturing, which is the process context in which these material choices should be read. Neither material alone determines wheel stiffness or durability — spoke type, tension, rim choice and build quality all contribute — so the material list is a starting point for specification discussion, not a performance claim in itself.

The 24H front and rear configuration is the detail most directly tied to carbon-spoke construction. A 24-hole layout at both ends supports balanced spoke layouts and efficient wheel construction, which is the practical reason the hub is paired with carbon spokes rather than a higher or asymmetric count. Builders planning a two-cross or radial/tangential mixed pattern should confirm the intended lacing and flange geometry with ARC before finalizing spoke lengths, since 24H layouts vary in how they distribute drive and braking loads.

Ratchet, Freehub and Brake Compatibility

Engagement is a specification choice, not a guarantee. The hub set offers a 36T or 54T ratchet system built on ARC's patented one-piece ratchet architecture, which the product information links to reliable engagement and efficient power transfer under demanding riding conditions. In practice, the 36T/54T decision is a trade the builder makes against the rider profile and service access — both options are stated as available, and the correct choice depends on the intended use case rather than one being universally superior.

Freehub compatibility covers Shimano HG, Micro Spline and SRAM XD, which means the same hub platform can be specified across the three drivetrain standards most Boost MTB builds use. This is a meaningful sourcing advantage for distributors and OEMs running multiple drivetrain configurations: one hub set family, three freehub options, fewer part numbers to manage. The Center Lock disc brake interface is also fixed on the set, so rotor mounting is settled in the same specification pass.

Before ordering, buyers should confirm which freehub standard and which ratchet tooth count each SKU ships with, and verify that the Center Lock interface matches the rotors and adapters planned for the build.

Boost Spacing and Weight Checks

The set uses 15×110mm front and 12×148mm rear Boost spacing, the current standard for most trail and XC mountain bikes. These figures should be matched against the frame and fork dropouts, and against any conversion hardware the builder intends to use, before the wheelset is committed. Boost spacing is now widely supported, but builders working across older frames or mixed fleets should still treat it as a per-project check rather than an assumption.

The stated total weight is approximately 340.1g for the set. Two cautions apply. First, "approximately" is a published figure, not a batch-specific measurement, so buyers should confirm the weight tolerance per configuration — the record gives one approximate figure for the set; per-configuration weights are not stated, so buyers should request them at sample stage. Second, a hub set weight does not translate directly into wheelset weight or ride feel; rim mass, spoke count and tire choice dominate. The 340.1g figure is useful for comparing hub platforms at the specification stage, not for predicting complete-wheel performance.

Working With ARC on OEM/ODM Hub Programs

For wheel builders and bike brand product managers, the MT-116F/R is best evaluated as a platform rather than a single purchase. Taicang Xiangyue Sports Equipment Co., Ltd., which operates as ARC, is a bicycle hub manufacturer founded in 2013 and based in Taicang, Jiangsu, China. ARC provides OEM and ODM solutions for global bicycle brands, wheel manufacturers and distributors across MTB, road, gravel and e-bike applications, which is the relevant route for a builder who needs the hub set specified to a particular wheel program.

In practical terms, that means raising the right questions early: which freehub standard and ratchet option the order will use, the weight tolerance for the chosen configuration, the intended spoke lacing for the 24H layout, and any branding or packaging requirements the program needs. Sample evaluation is the natural next step before a production commitment, and it is also where the specification questions above get resolved against real parts rather than published figures. ARC's CNC machining and quality control capabilities are the manufacturing context for those discussions; any certification, lead time, minimum order quantity or customization scope should be confirmed directly with ARC rather than assumed from the product page.

The MT-116F/R hub set suits builders whose program centres on lightweight Boost MTB wheels with carbon spokes, who want one hub platform covering 36T/54T engagement and all three major freehub standards, and who value a supplier that both machines the hubs and offers OEM/ODM collaboration. Builders can review the ARC MT-116F/R 24H Carbon-Spoke Boost Center Lock MTB Hub Set specification, then open a sample and specification conversation with ARC to confirm the configuration that matches their wheel program.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China