MTB Wheel Builds

ARC MT-116F/R Hub Set: What It Offers Lightweight MTB Wheel Builds

17 min read
On this page 6 sections

For wheel builders and product managers working on lightweight mountain bike wheelsets, hub selection often decides how smoothly the rest of the build comes together. Spoke count, axle spacing, brake mount and freehub standard all have to line up before a single spoke is tensioned, and the hub set itself needs to carry those decisions without adding unnecessary mass. The ARC MT-116F/R 24H Carbon-Spoke Boost Center Lock MTB Hub Set is positioned squarely at that task: a hub set configured for lightweight, high-performance MTB wheel builds, offered by ARC, the Taicang-based hub manufacturer that supplies OEM and ODM solutions to bicycle brands, wheel manufacturers and distributors.

What the MT-116F/R Is Built For

The stated purpose of the MT-116F/R is narrow and useful: lightweight, high-performance mountain bike wheel builds. That framing matters because it tells a buyer where the hub set is meant to sit in a product line rather than asking them to infer it from a spec sheet.

Two details sharpen the intended use. First, the hub set is engineered specifically for carbon-spoke applications. Carbon spokes change the load path and tensioning behaviour of a wheel compared with steel spokes, so a hub intended for that context is a more relevant starting point than a general-purpose MTB hub. Second, the 24H front and rear configuration is described as supporting balanced spoke layouts and efficient wheel construction — a practical consideration when a builder is trying to keep a wheel light without creating an awkward lacing pattern.

For a wheelset programme targeting weight and ride quality, this is the right level of specificity: the hub set declares the build type it serves before the conversation moves to individual dimensions.

Build-Relevant Configuration, Spec by Spec

The specifications a buyer must reconcile with their frame, rotor and drivetrain choices are where the MT-116F/R earns a closer look.

Materials. The hub shell is precision-machined from AL6061-T6 aluminium, while the axle, freehub body and end caps use high-strength AL7075 aluminium. This is a familiar split in performance hub design: a shell alloy chosen for machinability and structural consistency, and higher-strength aluminium at the load-bearing and wear-prone parts.

Spoke count. Both front and rear are 24H. A matched 24H front-and-rear configuration simplifies spoke purchasing and lacing planning across a wheelset rather than forcing two different spoke counts into one bill of materials.

Axle spacing. The set uses 15×110mm front and 12×148mm rear Boost spacing. These are the dimensions to confirm against the intended frameset before anything else, because Boost spacing is a frame-fitting condition, not a preference.

Brake interface. Center Lock is the disc mounting standard on both hubs. That determines rotor choice and installation method, and it is worth checking early against the rotor the wheelset will be specified with.

Freehub standards. Shimano HG, Micro Spline and SRAM XD are all listed as compatible freehub standards, which means the drivetrain interface can be matched to the groupset rather than the other way round.

Weight. The set is stated at approximately 340.1g in total.

Each of these is a variable the buyer specifies or verifies; none of them should be assumed. A wheel programme that gets the spacing, brake mount and freehub standard right at the outset avoids a late specification change that ripples through spokes, rotors and drivetrain components.

Choosing the Ratchet and Drivetrain Interface

Two selectable variables sit inside the MT-116F/R order: the ratchet tooth count and the freehub standard.

The hub set is offered with either a 36T or 54T ratchet system built on ARC's patented one-piece ratchet architecture, which the product information describes as delivering reliable engagement and efficient power transfer under demanding riding conditions. The choice between 36T and 54T is an engagement-character decision that belongs with the rider profile and intended terrain the wheelset is designed for, and it should be locked in as part of the wheel specification rather than left to the end of the programme.

The freehub choice is more mechanical. Shimano HG, Micro Spline and SRAM XD map to different drivetrain ecosystems, so the correct selection follows from the groupset the finished wheel will run. Because all three are supported within the same hub set, a wheel brand can build variants around a single platform instead of sourcing separate hubs for each drivetrain family — a meaningful simplification for anyone planning a range rather than a single model.

Buyers should treat both variables as order-time decisions to confirm explicitly with ARC, since they determine what is actually manufactured and delivered.

Weight and Balance in a Lightweight Build

The approximately 340.1g figure is a hub-set weight, and that distinction should travel with it through every planning document. It is not a complete wheel weight, and it does not include rims, spokes, nipples, rotors, cassette or sealant. Presenting it as a wheel weight in marketing or specification sheets would misrepresent the product and mislead the buyer.

Used correctly, the figure is a useful input to the weight budget: it tells the product manager how much of the target wheel mass the hub set consumes, leaving the remainder to be allocated across rim and spoke selection. Whether a wheel built around the MT-116F/R actually lands at a given weight depends on those other components and on the build itself, so the hub figure should be treated as a stated reference point rather than a guaranteed outcome.

The lighter-material story is consistent with that reading. AL7075 at the axle, freehub body and end caps, together with the AL6061-T6 shell, reflects a design that pursues mass reduction through material and machining choices — but the practical test remains the completed wheel, not a single number from the specification.

Evaluating ARC as a Hub Supply Partner

The MT-116F/R is a product of ARC, formally Taicang Xiangyue Sports Equipment Co., Ltd., a bicycle hub manufacturer founded in 2013 and based in Taicang, Jiangsu, China. The company's stated focus is the research, development, manufacturing and customisation of high-performance hubs, with OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors across MTB, road, gravel and e-bike categories. For a buyer sourcing hubs for a lightweight MTB wheelset line, that is a relevant supplier profile: the product in question sits inside a hub-making business rather than beside it.

Before committing, buyers should close out the checks that the product information does not settle. Confirm the 24H front-and-rear configuration against the intended lacing plan and carbon-spoke specification. Verify Boost spacing and Center Lock compatibility against the frameset and rotor. Fix the ratchet tooth count and freehub standard in writing. Treat the approximately 340.1g figure as a hub-set reference and validate final wheel weight through the complete build.

Beyond the specification, the questions that belong in any supplier evaluation apply here too: sample or prototype arrangements, inspection criteria, production consistency expectations and commercial terms for the volumes planned. These are items to raise directly with ARC rather than assume, and they are the natural next step once the technical fit has been established.

For teams developing a lightweight MTB wheel around a 24H carbon-spoke, Boost, Center Lock platform, the ARC MT-116F/R is a coherent starting point and a reasonable candidate for the hub shortlist — provided the build variables above are confirmed against the actual wheel programme before tooling and ordering decisions are made.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China