For a fixed-gear or track bike program, a hub that arrives with the cog and lockring already matched to the shell is more than a convenience item. It changes how the drivetrain is specified, how sprocket retention is validated, and what a buyer must document with the hub manufacturer before an OEM or ODM order is released. The ARC GT-002FR is built around exactly this package: a CNC-machined track hub supplied with a 16T fixed-gear cog and lockring.
What a 16T Cog and Lockring in the Box Actually Changes
A fixed-gear drivetrain has no freewheel to absorb load, so the cog and its locking hardware carry the full pedalling and back-pedal forces. When the hub supplier bundles the cog and lockring with the shell, three practical things shift for the buyer.
First, gearing becomes part of the hub specification rather than a separate aftermarket decision. A 16T cog produces a defined gear ratio against the chainring the buyer selects, and specifiers can treat that ratio as a fixed input when sizing chainstays, chain length and frame clearance. For complete-bike OEMs, the kit simplifies bill-of-materials lines and reduces the risk of a mismatched cog arriving from a second supplier.
Second, sprocket retention is designed as a system. The GT-002FR uses an integrated locking structure with double-sided fixed-gear threading, so the cog and lockring interface is defined by the hub itself. Buyers should confirm that the supplied lockring matches the hub's locking feature, that thread direction on each side is suitable for the intended drive side, and that the cog seats fully against the shell shoulder.
Third, the 16T size sets chainstay and chain-line constraints worth checking early. A smaller cog pulls the chain closer to the hub centre, which can matter on short track frames and on builds with tight tyre clearance. These are design questions for the frame and wheelset team, not defects in the hub, and they are best resolved before tooling or bulk release.
Specifying the GT-002FR for OEM and ODM Builds
The ARC GT-002FR CNC Track Hubs give buyers a concrete starting point for a fixed-gear hub specification. The shell is fully CNC-machined from AL6061-T6, while the axle, freehub components and end caps use high-strength AL7075 aluminium. Those are the material grades to write into a purchase specification and to verify against incoming inspection, rather than treating "aluminium" as sufficient.
When defining an OEM or ODM build, separate the specification into layers the manufacturer and the buyer can each sign off:
- Shell and axle: confirm shell material (AL6061-T6) and axle material (AL7075), plus the axle type and end-cap configuration required by the buyer's frame standard.
- Threading and locking: confirm double-sided fixed-gear threading, the integrated locking structure, and how the supplied lockring engages it.
- Cog and lockring bundle: confirm the 16T cog is supplied with the hub, its tooth profile and chain compatibility, and that the lockring is the correct match.
- Fit and clearance: confirm frame spacing, chain line and chainstay clearance against the buyer's frame drawing before approving the design.
- Finish and branding: for ODM work, agree finish, graphics and packaging requirements as part of the sample stage.
Because ARC designs and manufactures CNC-machined hubs and runs OEM and ODM programs, a buyer needing a customized rather than catalogue hub can raise these points directly with the manufacturer instead of adapting an off-the-shelf part. Founded in 2013 and based in Taicang, Jiangsu, ARC focuses on the research, development, manufacturing and customization of high-performance bicycle hubs — relevant when the requirement is a defined fixed-gear specification rather than a stock item.
Questions to Settle Before Committing to Bulk Production
The cog and lockring bundle is a useful prompt for a wider supplier checklist. Before placing a bulk or custom order, ask for dimensional inspection records covering shell bore, axle fit, flange spacing and thread condition. Thread quality deserves particular attention on a fixed-gear hub, since damaged or poorly cut threads compromise sprocket seating and lockring engagement.
Request a sample build with the supplied 16T cog and lockring fitted, then verify that the cog seats squarely, the lockring tightens without binding, and the assembly holds under back-pedal load. Confirm how the cog and lockring are paired and packed so that a kit is not split or mismatched in volume. For ODM programs, agree drawing approval, sample sign-off and change-control steps in writing, and record which dimensions are critical to the buyer's frame interface, since those are the values that must stay consistent across production lots.
Where ARC Fits a Fixed-Gear Hub Program
Buyers sourcing fixed-gear and track hubs in volume generally need a supplier who can hold a defined specification and support customization, not just ship a standard part. ARC's OEM and ODM work covers bicycle brands, wheelset builders and distributors, and its product range spans MTB, road, gravel and e-bike hubs alongside the track line — useful context for a brand that wants several hub families from one manufacturing partner. The GT-002FR, with its AL6061-T6 shell, AL7075 axle and end-cap set, integrated locking structure, double-sided fixed-gear threading and supplied 16T cog and lockring, is a sensible candidate for brands and wheelset builders whose fixed-gear program depends on predictable sprocket retention and a clearly documented cog specification. Buyers who need a customized track hub kit are well placed to open a specification discussion with ARC, starting from the cog, lockring and locking structure and working outward to axle, spacing and finish requirements.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China