For a bike brand, wheel builder or component buyer specifying a Boost MTB hub set, the freehub body is not a detail to settle after the frame and rim are chosen. It is the interface that determines which cassettes can be fitted, how the rear wheel is dished and spaced, and whether a single hub platform can serve several drivetrain programmes. Getting it wrong is expensive at the assembly line rather than at the drawing board.
ARC approaches this as a configuration question rather than a catalogue question. The company manufactures the ARC MT-051F/R 28H Boost 6-Bolt MTB Hub Set, and that model is offered with a choice of Shimano HG, Micro Spline and SRAM XD freehub standards — one Boost platform that can be specified against different drivetrain plans.
Why the freehub standard comes first
A hub shell, axle and bearing arrangement can be shared across a model family, but the freehub body is the part that physically receives the cassette. Its spline pattern, overall length and the way the smallest sprockets seat are all fixed by the standard. Once the freehub is locked in, the cassette family is locked in with it, and so is the drivetrain ecosystem the finished bike will be sold into.
This is why specifying a Boost hub set usually starts with a single question: which cassette will the rear wheel carry? A brand building one frame platform for several build tiers may need more than one answer, and that is where a hub offered in three freehub options becomes commercially useful — the same shell geometry, spoke drilling and brake interface can be carried across builds while the freehub changes with the groupset.
Two further points matter at the purchasing stage. First, the freehub choice does not exist in isolation: it has to be consistent with the rear spacing, the rotor mount and the spoke count that the rim and frame require. Second, the freehub option should appear as a named line item on the specification sheet and the sample request, not as an assumption carried in an email thread. Buyers who treat it as a default often discover the mismatch only when the first cassette is offered up to the body.
How HG, Micro Spline and SRAM XD differ in practice
The three standards are best understood by what each was designed to accept.
Shimano HG is the long-established spline pattern. It is the widest-supported interface in the market and the natural choice where a build uses an HG-type cassette, including many lower and mid-tier groupsets and a broad range of aftermarket cassettes. Its splines are comparatively tall, and the interface has been used across an enormous installed base, which is why it remains the default for many volume-oriented builds. For buyers, its practical value is availability and predictability of supply.
Shimano Micro Spline is Shimano's newer, shallower-spline interface, developed for 12-speed mountain drivetrains. The spline geometry is designed around the smaller-diameter, lighter cassette bodies used in modern MTB groupsets. A Micro Spline freehub will not accept an HG cassette, and an HG body will not accept a Micro Spline cassette — the two are not interchangeable, which is exactly why the choice has to be made before the hub order is placed.
SRAM XD is SRAM's own interface, built around a threaded, smaller-diameter driver that allows cassettes to start with a 10-tooth sprocket. It is the correct body for XD-compatible SRAM mountain cassettes. As with Micro Spline, XD is a distinct interface; an XD cassette will not mount on an HG or Micro Spline body.
The practical takeaway for a hub buyer is that these three standards are not performance tiers of one another. They are different mechanical agreements with different cassette families. The engagement behaviour of the hub — in the MT-051F/R, a 6-pawl, single-tooth engagement system — is a property of the drive mechanism, while the freehub standard is a property of the cassette interface. Both matter, but they answer different questions, and neither should be inferred from the other. The freehub determines what fits; the engagement design determines how the drive feels once it is fitted.
Specifications that must match the freehub choice
Freehub selection is the first decision, but it is not a standalone one. Four other specifications travel with it, and they constrain the rim, frame and brake choices just as firmly.
Boost spacing. The MT-051F/R is built around 15×110mm front and 12×148mm rear Boost spacing. This is the modern trail and all-mountain standard, and it must match the frame and fork the wheels will be fitted to. A hub set with the right freehub but the wrong spacing is still the wrong hub set.
Spoke hole count. The MT-051F/R uses a 28H front and rear configuration. Twenty-eight holes is a common choice for modern MTB wheels where rim strength allows a lighter build, but it must be agreed with the rim supplier. A rim drilled for 32 holes cannot be laced to a 28H hub, and changing hole count late in a project usually means changing the rim order as well.
Brake mount. The model uses a 6-bolt disc brake interface. This is a separate commitment from the freehub and from the spacing, and it must match the rotors and the frame's brake standard. Centre-lock and 6-bolt are not interchangeable without an adapter, and adapters add stack height and parts count that many OEM builds prefer to avoid.
Axle and shell construction. The 28H Boost 6-Bolt hub set uses straight-pull spokes, AL6061-T6 aluminium hub shells, and high-strength AL7075 aluminium for the axle, freehub body and end caps, with S&S steel bearing options and a total weight of approximately 258.6g. Straight-pull lacing affects how the wheel is built and serviced, so wheel builders should confirm their spoke availability and build process before committing.
The reason to list these together is that they are usually specified by different people — the drivetrain by product management, the spacing by frame engineering, the rim and hole count by the wheel team, the brake mount by whoever owns the spec sheet. A hub set that offers a freehub choice is only useful if all four of those decisions are captured in the same configuration.
Confirming the configuration before production
The gap between a good hub choice and a good hub order is documentation. Before a sample request or a production PO is issued, the configuration should be written down explicitly and agreed by both sides.
A practical confirmation sequence looks like this:
- Name the intended cassette family for each build variant, and map it to HG, Micro Spline or XD. Do not assume a body will suit more than one.
- Confirm spacing — 15×110mm front and 12×148mm rear Boost for this model — against the actual frame and fork drawings.
- Confirm hole count and lacing — 28H, straight-pull — with the rim supplier and the wheel builder.
- Confirm brake mount — 6-bolt — against the rotor specification.
- Record the freehub option on the sample request so that the sample evaluated is the sample that will be produced.
- Check the build weight assumption against the stated approximately 258.6g figure, and treat it as a reference rather than a guaranteed per-unit outcome, since bearings, end caps and finishing can affect the final figure.
For buyers working through OEM or ODM programmes, this documentation habit is what keeps a multi-variant order coherent. ARC provides OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors, which means the freehub option, hole count, brake mount and spacing can be discussed as a single specification package rather than as separate purchases. That is the practical advantage of sourcing a hub platform that already spans all three freehub standards: the drivetrain decision can change between build tiers without forcing a change of hub shell, spoke drilling or brake interface.
For a product manager or wheel builder finalising a Boost MTB hub set, the sensible order of work is to settle the cassette family first, then verify spacing, hole count and brake mount against the frame and rim, then put all of it in writing on the sample request. The ARC MT-051F/R is worth including on the evaluation list precisely because it allows that first decision — HG, Micro Spline or SRAM XD — to be made within one model, and because its published 15×110mm / 12×148mm Boost spacing, 28H drilling and 6-bolt mount give buyers a concrete baseline to check their own frame, rim and rotor choices against before the order is placed.
Contact Information
Company / Brand: Taicang Xiangyue Sports Equipment Co., Ltd.
Phone: +86 18262669919
Email: [email protected]
Official Website: www.arc-china.com
Address: No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China