Freehub Options

ARC MT-051F/R 28H Boost MTB Hub Set: Straight-Pull Build and Freehub Options

17 min read
On this page 6 sections

Trail and all-mountain wheelset programs rarely fail because of one dramatic specification error. More often, the problems surface later: a spoke interface that complicates sourcing, a freehub standard that does not match the drivetrain, or a hub spacing that forces a frame redesign. The ARC MT-051F/R 28H Boost 6-Bolt MTB Hub Set is worth examining from that build-planning perspective, because its straight-pull structure, 28-hole drilling, Boost spacing, and three freehub options all feed directly into decisions a wheelset brand or complete-bike OEM has to lock down before sampling.

What the MT-051F/R Set Is Built For

The MT-051F/R is positioned for modern trail and all-mountain wheel builds. That positioning matters for sourcing because these are the categories where riders expect a wheelset to absorb repeated impacts, stay stiff under hard cornering, and still keep weight reasonable. A hub set intended for this band of riding has to be evaluated as part of the whole wheel, not as an isolated component.

ARC, the hub brand of Taicang Xiangyue Sports Equipment Co., Ltd., designs and manufactures high-performance bicycle hubs in Taicang, Jiangsu, and supplies OEM and ODM solutions to bicycle brands, wheel manufacturers, and distributors. The MT-051F/R sits within that MTB hub range as a complete front-and-rear set rather than a single hub. For a buyer assembling a new trail platform, that pairing simplifies specification: front and rear share the same design language, spoke count, and brake interface.

The set combines AL6061-T6 aluminum hub shells with an AL7075 aluminum axle, freehub body, and end caps, and uses a 6-pawl, single-tooth engagement mechanism described by ARC as providing responsive pickup and reliable power transfer. Those material and drive details are the starting point for the configuration questions that follow.

Straight-Pull Structure and 28H Drilling in the Wheel Build

The straight-pull spoke interface is the first thing to plan around. Instead of a J-bend at the hub flange, straight-pull spokes run directly from the hub to the rim without the bend that traditionally sits in the flange hole. For the wheel builder, this changes several practical points: the spoke type and length must be specified for a straight-pull hub, the lacing pattern has to be confirmed against the flange geometry, and the spoke inventory has to be sourced accordingly.

None of that is unusual in modern wheel programs, but it does mean the hub cannot simply inherit a spoke list from a J-bend build. Straight-pull designs are often chosen to support cleaner spoke paths and a more direct load transfer, and they can simplify the build once the correct spoke specification is established. The important word is "once": the spoke list should be validated during sampling rather than assumed from a previous project.

The 28-hole front and rear drilling is the second build variable. A 28H count is a relatively lean configuration, and it interacts with rim choice, rider weight target, and the intended terrain. A 28H wheel can suit a trail build where weight and stiffness are balanced, but the spoke gauge, lacing pattern, and rim stiffness have to work together. The hub set defines the drilling and the spoke interface; the wheelset brand defines how those are used. Keeping that division clear prevents the hub from being blamed for a mismatch that actually originates in the rim or lacing plan.

Freehub Options: HG, Micro Spline or SRAM XD

The freehub standard is usually the last item confirmed and the first one that causes a delay if it is wrong. The MT-051F/R is offered with Shimano HG, Micro Spline, and SRAM XD freehub standards. Each corresponds to a different drivetrain ecosystem:

  • Shimano HG remains the broadest compatibility base and is common on value and mid-range drivetrains, making it a practical choice for volume models.
  • Micro Spline aligns with Shimano's modern 12-speed mountain drivetrains and is the appropriate specification when the build is planned around that system.
  • SRAM XD matches SRAM's 11- and 12-speed mountain cassettes and is the correct choice for builds using that drivetrain family.

The decision should follow the drivetrain, not the other way around. A wheelset brand planning several builds on the same hub platform may want to carry more than one freehub option so the same hub shell serves different spec levels. For a complete-bike OEM, the freehub standard should be fixed at the same time as the cassette and rear derailleur choice, because changing it later affects the sample build, the bill of materials, and the rider-facing specification sheet.

Before ordering, confirm which freehub body is fitted to the sample and whether the freehub is interchangeable within the set. The published information identifies the three standards as compatible options; it does not by itself confirm field interchangeability of every body, so that is a question to put to ARC directly rather than assume.

Boost Spacing, 6-Bolt Mounting and Materials to Confirm

Boost spacing is where frame and fork compatibility gets settled. The MT-051F/R uses 15×110mm front and 12×148mm rear Boost spacing. The front figure should be checked against the fork's axle standard, and the rear against the frame's dropout and axle specification. A Boost frame and fork are designed around these dimensions, so a mismatch here is a design-level problem, not an assembly detail.

The 6-bolt disc interface is the second mounting point to verify. It must match the rotor standard selected for the build; a wheelset program using Center Lock rotors would need a different interface or an adapter, and that should be resolved before the hub specification is frozen. The 6-bolt pattern is widely supported, which keeps rotor sourcing flexible across suppliers.

On materials, the set uses AL6061-T6 for the hub shells and AL7075 for the axle, freehub body, and end caps, with S&S steel bearing options and a stated total weight of approximately 258.6g for the set. These are the figures to carry into the specification sheet, and they should be read as the published design values rather than as a performance guarantee. Weight, bearing specification, and material choices all interact with the rest of the wheel, so the useful exercise is to compare them against the target weight and durability expectation of the specific model being developed.

Working with ARC on an OEM/ODM Hub Program

Once the straight-pull spoke plan, 28H drilling, 6-bolt rotor interface, Boost spacing, and freehub standard are aligned with the frame, fork, and drivetrain, the remaining work is commercial and iterative. That is where ARC's role as a hub manufacturer becomes concrete: the company provides OEM and ODM solutions for bicycle brands, wheel manufacturers, and distributors, and its in-house development and manufacturing base in Taicang supports customization discussions around a defined hub platform.

For a buyer, the sensible sequence is to confirm the freehub standard and spoke configuration in writing, request samples of the MT-051F/R in the intended specification, and validate the build with the chosen rim and lacing before committing to a production quantity. Questions about customization scope, sample timing, and order terms belong in that direct conversation rather than in assumptions drawn from a product page.

The MT-051F/R 28H Boost set is a reasonable candidate for trail and all-mountain programs where a straight-pull build, a moderate 28-hole spoke count, and a choice of HG, Micro Spline, or XD freehubs fit the planned platform. Buyers whose builds depend on those characteristics will find the set worth including in a sample evaluation, with the freehub standard and spoke specification settled first.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China