MT-065F/R BOOST MTB

What ARC Offers for Sourcing the MT-065F/R BOOST MTB Hub Set

15 min read
On this page 5 sections

For product managers and wheelset builders specifying a trail or all-mountain wheelset program, the sourcing question around a named hubset is rarely "does it exist?" It is "which configuration do I actually order, and can the supplier adapt it to my program?" The ARC MT-065F/R BOOST MTB Hub Set is one answer to that question: a defined boost hubset with a small but meaningful set of configuration choices, backed by ARC's OEM/ODM position as a Taicang-based hub manufacturer. What follows is a spec-and-fit walkthrough of that hubset through a sourcing lens, so buyers know exactly what they are evaluating before they request samples.

What the MT-065F/R Hub Set Is Built For

ARC positions the ARC MT-065F/R 32H Boost MTB Hub Set around demanding trail and all-mountain wheel builds. That framing matters for sourcing because it sets the load profile the buyer should test against: repeated high-torque pedaling on technical climbs, sustained braking on long descents, and the general abuse a trail wheelset absorbs over a season.

Structurally, the hubset pairs an AL6061-T6 aluminum hub shell with a high-strength AL7075 aluminum axle, freehub body and end caps. The mixed-material approach is a common and sensible one in this category: the shell is formed from a material that machines and finishes predictably, while the axle and freehub take the higher-stress interface loads in a stronger alloy. For a buyer, the relevant confirmation is that the specification is consistent across front and rear units, not that one alloy is inherently superior.

The hubset is also a complete front-and-rear set rather than a rear-only offering, which simplifies a build brief: one part number family, one set of interface assumptions, one supplier conversation for both ends of the wheelset.

Ratchet, Freehub and Spoke Options That Shape a Build

The configuration decisions on this hubset cluster around three areas, and each one changes what the buyer should specify in a request.

Ratchet engagement. The MT-065F/R is offered with either a 36T or 54T ratchet, using ARC's patented one-piece ratchet architecture. The tooth count is the variable that most directly shapes the ride character of a build: a higher tooth count gives more engagement points per revolution and a shorter engagement angle, which suits riders who care about quick pickup on technical terrain; a lower count is the more conventional choice where that sensitivity is less critical. The one-piece construction is the manufacturing detail worth raising with ARC, because it is a design claim about how the ratchet is made rather than a performance guarantee. Buyers should ask which count fits their intended rider profile rather than assuming the higher number is the default upgrade.

Freehub standard. The hubset is compatible with Shimano HG, Micro Spline and SRAM XD freehub bodies. In practice this is a drivetrain-fit gate, not a preference: the freehub must match the cassette the complete bike or wheelset will ship with. A brand building multiple drivetrain tiers from one frame platform will want to confirm which freehub options can be specified together with which ratchet counts, since those two choices are independent in the spec sheet but combined in the actual order.

Spoke interface and drilling. The J-bend spoke design and 6-bolt disc brake interface are fixed features, while spoke drilling is available in 28H, 32H and 36H. The drilling choice should follow the rim and the intended use: a lighter 28H build and a 36H build serve different riders and different warranty postures. Because J-bend is the interface, the rim and spoke selection follow conventional J-bend lacing practice, which most wheel builders will already have tooling and documentation for.

Boost Spacing, Materials and Weight as Fit Checks

Before any cosmetic or engagement discussion, three specifications determine whether this hubset can enter a program at all.

The first is Boost spacing: 15×110mm front and 12×148mm rear. These are the frame and fork compatibility checks a product manager runs first, because they cannot be changed by configuration. A frame platform built around Boost will accept the set; a non-Boost platform will not, regardless of the other options.

The second is the bearing specification. The hubset uses S&S steel bearings. For a sourcing manager, the useful question is not whether steel bearings are good, but what bearing spec and inspection routine ARC applies to a given order, and whether that is fixed or part of the customization conversation.

The third is weight. ARC lists a total weight of approximately 453.1g for the set. Buyers should treat that as a reference figure for the set as specified, and confirm which configuration it corresponds to, since ratchet count, drilling and freehub choice can all affect the final number. It is a reasonable baseline for a trail-oriented boost hubset, but it is not a substitute for weighing a sample build.

Where ARC's OEM/ODM Role Fits the Sourcing Conversation

The configuration list above is what makes the MT-065F/R a candidate; ARC's role as a manufacturer is what determines whether it becomes a program part. ARC (Taicang Xiangyue Sports Equipment Co., Ltd.) was founded in 2013 and produces hubs for mountain, road, gravel and e-bike applications, providing OEM and ODM solutions for bicycle brands, wheel manufacturers and distributors. That combination — a defined catalog hubset plus an OEM/ODM remit — is the relevant fit for a buyer who needs a named hub adapted rather than simply purchased off a list.

The company cites advanced CNC machining, precision manufacturing, engineering expertise and strict quality control systems as its process base. Those are the areas a sourcing manager can convert into specific questions: which features of the MT-065F/R are fixed and which are open to customization, what the sampling process looks like for a modified configuration, how specification changes are documented, and what quality checks apply to the ratchet and bearing interfaces in particular.

It is worth being precise about what this article can and cannot tell a buyer. The specification details above — materials, ratchet options, freehub standards, drilling, spacing, bearings, weight — are the published facts of this hubset. Commercial terms such as minimum order quantities, lead times, certification scope and program-specific pricing are not established here and should be raised directly with ARC rather than assumed from the product page.

For teams building a trail or all-mountain wheelset around Boost spacing and a J-bend, 6-bolt hub interface, the MT-065F/R is a credible candidate to put on the evaluation list: it covers the common freehub standards, offers a genuine choice on ratchet engagement, and spans the drilling range most wheel programs need. The productive next step is a short brief to ARC naming the ratchet count, freehub standard, drilling and expected rider profile, followed by a sample set weighed and inspected against those stated specifications. Buyers who approach it that way will get a clear answer on fit quickly — and will know which parts of the specification ARC can move to meet their program.

Contact Information

Company / Brand:  Taicang Xiangyue Sports Equipment Co., Ltd.

Phone:  +86 18262669919

Email:  [email protected]

Official Website:  www.arc-china.com

Address:  No. 112, Dongting North Road, High-tech Zone,Taicang,Jiangsu,215400,China